Photo request... throttle cable bracket

Can someone please post a photo of a stock throttle cable/kickdown bracket for a 383/440 4 BBL 69 B Body???

Trying to figure out what the correct one is supposed to look like.

THANKS!

I was told mine is a 2 bbl bracket. It was modified to allow the cable to sit further forward by adding a second clamp (removed in pic) where the paint is missing.

http://i20.photobucket.com/albums/b237/topper69/bracket2.jpg

This is from a 440 that came out of a mid 70's Dodge Daydreamer

This is the correct bracket. I have them in stock.
http://i79.photobucket.com/albums/j121/pepsparts/HOFFMANS/00596770bbnonacthrottlecablebkt.jpg

This is from a 440 that came out of a mid 70's Dodge Daydreamer

Now how could you charge 150 for that dirty old bracket? (see above)

Come on, we are talkiing MOPARS here...:grin:

Now how could you charge 150 for that dirty old bracket? (see above)

Come on, we are talkiing MOPARS here...:grin:


Who is charging $150?

Hmmm, that looks like the same bracket I have????

This is the correct bracket. I have them in stock.
http://i79.photobucket.com/albums/j121/pepsparts/HOFFMANS/00596770bbnonacthrottlecablebkt.jpg

Correct for a car with an automatic, but not a 4 speed (loose the stud)

It is the SAME exact bracket for both automatics and manual trans cars. If your going to use this bracket on a manual trans equipped car then all you have to do is to remove the stud for the kickdown linkage. I don`t sell two different brackets, this bracket is used for both applications. The title of this thread asked for a picture of the bracket that I posted a picture of which is the exact bracket the original poster asked about. I hope the pic helped you and good luck with your project.