BlueSS454
11-05-2008, 05:48 PM
Any of you guys have a 69 big block with A/C car? I need to see some pics of the firewall near the blower motor. I need to know where the harness for the blower motor and A/C compressor comes through at and where the 2 vacuum lines are suppose to go.
Jeff's70RT
11-05-2008, 08:28 PM
Hello, here is a close-up of the vacuum and water valve. Hope this helps! Take care, Jeff 2603
rolling_Thunder
11-06-2008, 12:11 AM
the green and blue wires (compressor and blower) come out on the top of the firewall bulkhead connector next to the neutral safety - I believe terminal 'A' is Blue and 'B' is Green
BlueSS454
11-06-2008, 04:21 PM
Awesome, thanks guys. That would explain the empty slots in the wiper motor harness then and why the wire ends resemble those that would go in the bulkhead connector.
THe water valve in the picture...Is that a 1970 valve? I have never seen that vacuum pod on a 69 valve. I pulled the valve I have in my car out of a 69 small block Charger in the junkyard and it doesn't have it.
Chatt69chgr
11-06-2008, 08:17 PM
The vacuum control was not used in 69. Was used in 70.
BlueSS454
11-12-2008, 07:48 PM
OK, I got the blower motor and compressor all fixed up and working now. I still need to know where the 2 vacuum lines from the heater box that come through the firewall go. I'm gonna have to remove the wires from the wiper motor harness again anyways since I have to send it out to get restored...it doesn't even try to come on. After that maybe I can get the rest of the A/C components and get that working. I have a list of like 10-15 things I need to do to the car this winter.