Power window aftermarket recommendations

I have an electric-life system the the Coronet. It works OK. It is about 7 years old. Are there any other decent set ups available?

They have been reliable but a little slow. May have nothing to do with them. Could be the electrical in the car.

Check out the link. I am looking for power windows for my convertible 70 coronet. XV motors sports used to sell them for a convertible but got to many complaints from people who could not get them to work right . The link say that Nu-Relics.com made them for XV. I contacted them and am trying to get something that will work,preferably the setup that they sold XV. If I get some to work I will let everyone know


http://www.forbbodiesonly.com/moparforum/showthread.php?p=83875

Than you for the link. Looks to me like a1electric is the only game in town. I got a set for my pal with an e body. They are reliable, lighter, and do not require any mods to the door panel. New regulators included too.

Check out the link. I am looking for power windows for my convertible 70 coronet. XV motors sports used to sell them for a convertible but got to many complaints from people who could not get them to work right . The link say that Nu-Relics.com made them for XV. I contacted them and am trying to get something that will work,preferably the setup that they sold XV. If I get some to work I will let everyone know


http://www.forbbodiesonly.com/moparforum/showthread.php?p=83875

I need a set of rear only for a 70 convertible if you find out any info let me know ? or if we can get a group buy discount ???

I just talked to Nu-relics and they may be able to make up a set . I have a buddy that has a wrecked 68 satellite convertible that I will try to cut the rear metal frame out to send to Nu-relics so they can make up a set. Hopefully it works

I just talked to Nu-relics and they may be able to make up a set . I have a buddy that has a wrecked 68 satellite convertible that I will try to cut the rear metal frame out to send to Nu-relics so they can make up a set. Hopefully it works

cool i have front power windows installed and they work great i just need rear regulators and motors and i'm set Let me know


is that another topless bird in your avitar ???

I have built it in the late 90's. Its a daily driver when the sun is out

I have built it in the late 90's. Its a daily driver when the sun is out

more pictures please , did i meet you in minnesota a couple years ago @ curt and jans house ??? Mopars in the park ???

anymore info on the window regs ?

Yes,I showed you a picture of it at the car museum,I will try to find more pics

Yes,I showed you a picture of it at the car museum,I will try to find more pics

cool great yes, lets see more pictures of it . And please let me know about the rear regulators I really need a set badly

I found a wrecked convertible that I am trying to get the rear interior panel that the regulator bolts to. Once I have it I can ship it to see if they will make me a set. Winter slows people down ,its takeing longer to get him to cut it out and send it to me

I found a wrecked convertible that I am trying to get the rear interior panel that the regulator bolts to. Once I have it I can ship it to see if they will make me a set. Winter slows people down ,its takeing longer to get him to cut it out and send it to me

ok great

car pic

orange rims

awesome thanks I love it

is this your car ?

Yah , thats my town. What the word on the rims. orange rims? or the rally rims? And this is my new toy.

I like the ralleys but really it looks great with either


nice cuda

Finally got my convertible rear metal panel today. Now I have to bolt my parts to it and ship it off to get the power regulators made.

is this your car ?

Geez Stuart, I was laughing at that, thinking, no, I am sure it someone else's orange ragtop wing. Then I remembered seeing a yellow one in my neck of the woods last year. I need to go to bed.....

Finally got my convertible rear metal panel today. Now I have to bolt my parts to it and ship it off to get the power regulators made.

let me know i want a set also rear only

Geez Stuart, I was laughing at that, thinking, no, I am sure it someone else's orange ragtop wing. Then I remembered seeing a yellow one in my neck of the woods last year. I need to go to bed.....

we are an elite club and your out LOL :bootyshake::bootyshake::bootyshake:

Sounds like the piece arrived and was what you needed. Good luck getting your power window setup going and please keep me posted on the progress as this would be a nice upgrade for my car down the road.Thanks for helping me find a home for the that piece. Anything else you might need let me know.

Sounds like the piece arrived and was what you needed. Good luck getting your power window setup going and please keep me posted on the progress as this would be a nice upgrade for my car down the road.Thanks for helping me find a home for the that piece. Anything else you might need let me know.

nice convertible

Thanks,that one you've got is very sweet!

Thanks,that one you've got is very sweet!

i have alot of fun with it , great attention getter :angel1:

Shame on you for laughing at my convertible. I only did what everyone does to new cars. I put a spoiler on the rear and changed the frontclip.I just couldnt afford to buy a honda,lol,.

Update on the rear power regular: I just mounted everything to the metal panel and sent it out to for them to engineer me a power setup for the rear of my coronet. If they work good I will get a second set for my superbirdrag

My guess is that it will take at least 8 weeks from delivery to and from them. I hope it will be ready so I can pick them up on the way back from mopars in the park show in june

my buddy made a set for his 70 coronet convertible out of 88 chevy van front regulatos , I think i have talked him into making me a set also his work great

my power regulators are done. They are shippng them today,I should have them next week

Great, let us know how they work out and please post some pics.

I will do better , I will post a you tube video once i get it installed

I will do better , I will post a you tube video once i get it installed

what would the cost be incase mine done work out ??????

took my arm and mounted it to the crank and motor from a 88 chevy full size van they work great

Here is a couple of you tube videos of the power regulators in operation front and back. The price is on the web site


http://www.youtube.com/watch?v=oV1nBYIveJ4







http://www.youtube.com/watch?v=2J7YmH1Egtc

cool nice smooth

Looks like your set up works well,I googled www.newrelic.com and didn't come up with anything auto related. Is that the correct spelling.

http://nu-relics.com/contact.html

Thanks, I'll check them out.