Slicks storeage/ liners or tubes?

What do you guys use to seal your rear tires to your rims?

Do you use liners or tubes with your rim screws?

Do You use rim screws?

Do you use rubber or ss steel valve stems?

How do you store spare slicks?

I use tubes and screw the tire to the wheel. Have had no problems yet. The spare slicks I store laying flat not stacked up. The tubes have a valve with threads on it with a nut so all is not going anywhere.

Whenever Racing it is MANDATORY for Screw in METAL Valve stems.
I Use Tubeless with Bead Sealer.
Remember that it is a Tenth And A Half Quicker WITHOUT Tubes...

Store Flat USUALLY with as Little Air as Possible.

Screws are there to Keep slicks from turning on the rim and bust off the bead.


SS