Glass run felt

Who has it and is it a pain to install? For a 64 2dr. hardtop. Im talking about where the door glass slides along inside the door, just to be more specific.

Metro molded parts has them for your car....

Installing them isn't too bad, pulling them out is a pain in the rear. I've used a small wood hammer with a layer of a shop rag over the top of the window felts to install them. Be careful, they bend easy

http://metrommp.com/

Mine went in really easy. Just cut them and install them dry to make sure they fit. Once you are sure use a good amount of weatherstrip adhesive. Mine took a number of times cranking the windows up and down to get them seated completely... make sure you do that while the adhesive is still wet.

I got mine from Joe Suchy.

And Joe Suchy is who, what company, any contact info would be appreciated.

I believe Joe and his wife run their business from their home. Be patient if you can't get ahold of them at first. They go to shows, etc..., and there's no one running things when they're away. He is great to deal with - really good guy, from my experience. I'm not affiliated with him, but I do like to promote the good guys when I find them.

Here's a cool story about him: http://www.ajc.com/ajccars/content/ajccars/content/stories//2008/08/30/plymouth_car_collector_Fairburn.html

There's a pricelist here (about 1/4 down the page): http://www.1962to1965mopar.ornocar.com/swapmeet2011.html

Here's his contact info: dinahandjoe@peoplepc.com 770.964.4441

Thanks, I'll get ahold of him and go from there.