B-Body rear

I have a b body 8-3/4 rear housing with big bolt pattern axles. I am looking to get 250 for everything. I do not go on this site a lot due to the fact that i own an a body, so if you are interested in this please email me at jvlax780@yahoo.com

P.S. The unit is located on Long island Ny, 11769

Thanks,
Joe

Oakdale! In da house!

What year is the rear from?
(It defines pearch and backing plate widths)

Not sure im not familiar with b bodys. Actually im new to mopars all together. I can take pictures at request and if you are interested in purchasing just guide me for what numbers you want me to pull i can do it.

Thanks,
Joe

Hummmm, I don't think the rears have numbers on them except to guide the repair on what exact items are inside the size rear it is. The front ham, that drops out has some numbers on it, drivers side lower front. They'll end in ethier; 741, 741 or 489. The size of the yoke is a nice to know as well. Theres to popular sizes to them. They'll use the big or small U-joints. (7260 or 7290)

Post up a picture and if you measure the backing plate widths and/or the spring pearchs center to center widths, it would be a great to know and help sell it.