10 " CRAGARS on a 69 Roadrunner ?

I want to run 10 " cragars on the rear of my 69 RR. The standard back spacing is 4 1/4. Is any one doing this combo with a 275/60/15 tire ? And does it rub ? Also if anybody has some pictures of 10" cragars on there 68 - 70 RR would be great.

I had 10 inch Cragars on my 70 Bee with 12 inch bias 50 series tires. I had air shocks that I kept so the quarter openingwas about 3 inches above the tire. It only rubbed on SEVERE cornering while also going over a bump. Not sure what the back spacing was, but they were pretty deep in hte front. I Also think 68-70 Dodge wheelwells are just a bit larger than Plymouth.

I don't think that backspacing will work. I have 10 inch rims with 275/60/15s and 5.5 backspacing and they fit perfect on my 70. I think they will stick out too far

Kd I have 10" prostars with 295/50/15's on my 69 roadrunner with a 4.5 inch back space and with the inner lip rolled they fit perfect. I did have some rubbing up in the wheel well on big bumps and people in the back. But I put on some calvert traction bars and it lifted the rear a good couple of inches to get the clearence I needed. Hope this helps man.
http://i185.photobucket.com/albums/x218/torkmnstr/CIMG3158.jpg
http://i185.photobucket.com/albums/x218/torkmnstr/CIMG3159.jpg
http://i185.photobucket.com/albums/x218/torkmnstr/CIMG3160.jpg
http://i185.photobucket.com/albums/x218/torkmnstr/CIMG3161.jpg

Any improvement with those Cal-Tracs vs the old pinion snubber trick?

A world of difference man! Nothing but solid plant, and they look good too!

Don't have Cragars but I do have 10" rims with 5,5bs and 295/50s on them. No rubbing...
http://farm7.static.flickr.com/6021/5963282973_5795b28729_m.jpg