Recommendations Please

theman440

11-30-2011, 10:03 AM

What are you using for body seam sealer? I'm looking for a type that is close to the factory stuff, brushes on easy then hardens up.

Thanks

70Fish

11-30-2011, 12:03 PM

I used the tan 3M stuff in the tube form, but they also make a brush on, or rope caulk form, too.

Propwash

11-30-2011, 11:34 PM

I have good luck with the Evercoat brushable/paintable seam sealer and the Caulk gun seam sealer from TP tools. The 3M out of a can always seemed too gummy for me, but the 3M out of a tube has worked well in the past.

Good luck!

66_B_Body4ever

12-02-2011, 08:51 AM

Whatever you use, make sure it's urethane based...