Reilly Motorsports Street Lynx Rear Suspension

Got mine yesterday. He's making it for the 66 - 67 B-bodies now. It's going in this weekend. I'll post the pics.

http://www.reillymotorsports.com/store/product.php?productid=16175&cat=263&page=1

can't wait to hear how it works. I plan on putting that set up on my 68 Coronet. Anyone here put their AlterKtion Coil-Over System on their car?

Overall fairly satisfied with the way that it's performing - good ride etc on the street and good traction and behavior on the strip.

I had to relocate the top upper arm brackets outboard on the crossmember to achieve the ride height that I wanted and to avoid having to weld the right side upper arm inside tab to the center section of my Dana 60.

You can see from 2nd pic that I have the top part of the arm temporarily bolted to the outside of the mounting brackets so that the bottom tabs could be located with the outside one in between the u-bolt on the axle. I had to cut that tab off of the crossmember and fabricate 2 new ones for the relocated postion. Don't have a pic of it finished but you get the idea.

Lookin' forward to seeing the end result.

Looks GREAT ! how long did the install take ?

Thanks. Should've taken a day but we had to fab up the new brackets so took an extra day to reconfigure the layout and make brackets.