Want to go Poverty . . .

Caps that is. What is the correct steel wheel and cap for 68? Thanks in advance.

14" with 3 bumps unless a Hemi. Then it would be a 15" with 3 bumps

68 used the larger 11" caps didnt it ? Much harder to find.

huh?????????????????

A guy on Moparts did some photoshop work on a pic of my 63 as I am thinking of going to the poverty caps. So he gave a me a few different looks with them on this link. Ron

http://board.moparts.org/ubbthreads/showflat.php?Cat=0&Board=Test&Number=4568366&page=1&fpart=all

As far as I know, all the poverty caps were the same diameter.

Go poverty!

Link doesnt work. I would want 15's for sure.

these are the correct HUB caps,they also had a full wheel cover and a magnum 500 option

from the link

My 69 Plymouth Division caps

My 69 Plymouth Division caps

This is what I want exactly!! Where to get and how much??$?$?

onebad, do you want the correct wheels for a '68 or are leaning towards the Plymouth Division dog dishes? Either way, I have both sets if interested.

Whatever is on the red car. How much?$$$

BE and A Parts sells complete sets of new Stainless Steel ones for $325.00

http://www.beaparts.com/images/item_images/247-PL.jpg

I found my Plymouth division dog dishes at a mopar swap meet for $80 for the set.
There are still some good deals out there.
http://i180.photobucket.com/albums/x158/DKapt/Yuri%20projects/policewheelssatellite.jpg

Here's a red 68 with correct 68 caps

onebad, pm sent.

Adam is right, there are two different sizes, they will not interchange - you need the right year wheels too. The newer dog dish caps are smaller, 9" across the back.

1968 Dodge caps;

http://www.hamtramck-historical.com/images/dealerships/DealershipDataBook/1968/68_Coronet0014.jpg

1969 Dodge caps;

http://www.hamtramck-historical.com/images/dealerships/DealershipDataBook/1969/69_Coronet0012.jpg

Thanks for the info guys.

All I can say is I've never had a problem putting any poverty cap on any wheel. The difference may not be size, since that info says nothing about different size caps, just different size wheels. It could be there was a difference in the caps ala stainless Vs aluminum

I am not exactly sure when the caps got smaller. I had some 1965 wheels I tried to put the 1970 style caps on and it was a no go.

The newer caps interchange, stainless or aluminum makes no difference.

There are indeed two different sized caps. I have some of each, but I'm not sure what the larger caps are off of.

I know there were some truck caps that were larger

Here you go.

http://www.forbbodiesonly.com/moparforum/showthread.php?t=543

'68 caps --

http://img.photobucket.com/albums/v339/hotwheelsjr/Cars/The%20Cuda/DSCF1158.jpg