1970 Power brakes

68383GTS

06-04-2009, 08:39 PM

If I put power brakes on my 1970 Road Runner do I need a different brake pedal ? Or will my standard manual brake pedal be the same?
Thanks,Jim

69 Runner

06-04-2009, 08:51 PM

Pedal is the same, but the rod from the pedal will have to be changed

68383GTS

06-04-2009, 08:55 PM

I have the booster,rod,and firewall plate from a 1969 Coronet.But the rod on the back of the booster is 2 or so inches short than the rod on the car now.
Thanks,Jim

69 Runner

06-04-2009, 08:58 PM

I'm sure you've figured it out already, but use the rod that matches the booster etc. You should be fine. I'm thinking it also has an adjustable tip so the length can be fine tuned.

68383GTS

06-04-2009, 09:03 PM

I don't think it adjusts I will have to take a look at it.My brothers Chally has power brakes I will have to take a look under his dash.I'll figure it out Thanks for your help
69runner. Thanks,Jim

ga66mopar

06-05-2009, 08:07 AM

You need this piece to convert to power brakes and the plate the master/ booster bolts to has the hole moved more to the center.

http://cgi.ebay.com/ebaymotors/MOPAR-POWER-BRAKE-LINKAGE-ROADRUNNER-CUDA-CHALLENGER_W0QQcmdZViewItemQQcategoryZ10076QQihZ01 0QQitemZ200347537138QQrdZ1QQsspagenameZWDVW

68383GTS

06-05-2009, 04:07 PM

Does anyone have this bracket.Looks like I am going to need one.
Thanks,Jim