plowman
09-01-2009, 08:06 AM
On my fender tag the tranny code is D21 shloud that also be stenciled on the side of the tranny? It is a 70 Super bee if that makes any difference Lynch road car. Thanks
|
|||
tranny codeplowman 09-01-2009, 08:06 AM On my fender tag the tranny code is D21 shloud that also be stenciled on the side of the tranny? It is a 70 Super bee if that makes any difference Lynch road car. Thanks 69 Runner 09-01-2009, 08:17 AM No. The D21 is just the code. What would be on the trans would be the last 3 of the part number plowman 09-01-2009, 12:28 PM http://i172.photobucket.com/albums/w17/olddog_photos/matchingtransmission0016.jpg can you tell by this picture what numbers are stenciled on tranny 69hemibeep 09-01-2009, 02:43 PM The large numbers painted on the side is an assembly line rack number and should match your broadcast sheet if you have one. plowman 09-01-2009, 06:04 PM ok got it build sheet says 674. Thanks for the picture. Looking for all the paint markings for the front suspension, rearend and etc. Anyone have any pictures they can send gandm@cablespeed.com I seen one like the picture above somewhere else but it had a white X also. 69hemibeep 09-01-2009, 07:10 PM ok got it build sheet says 674. Thanks for the picture. Looking for all the paint markings for the front suspension, rearend and etc. Anyone have any pictures they can send gandm@cablespeed.com I seen one like the picture above somewhere else but it had a white X also. I am only putting the marks on my car that I found cleaning. They were marked by so many different people or not marked on the line, plus over the years the people trying to duplicate marks have mixed them from different factories and even body styles. Don't fall into that trap, at some show someone that knows about the marks will ask where did that come from and what does it mean!:no: plowman 09-02-2009, 06:17 PM found out the white X was to mean it was filled with lube plowman 09-03-2009, 11:38 AM The large numbers painted on the side is an assembly line rack number and should match your broadcast sheet if you have one. Do you have a dimension on your rack numbers? | |||