maxsat65
07-28-2008, 02:39 AM
You should also list on
http://www.forbbodiesonly.com
-------------- Original message from rll <moparsandferrets@cox.net>: --------------
> Mopar stuff....
>
> Ferrets are cleaning up....
>
> 8 3/4 center sections, one 741 (2.76), three 742's open axle (3.23)
>
> $0.25 cents a pound and shipping.
>
> We can get $0.20 a pound at metal management...getting ready to load
> Bigger Red up for another run.
>
> Slant six engine...early 70's 225 spark plug tube style head, $ 0.25 a
> pound or offer, pick up only phx az.
>
> Factory ac/heat box, complete, one 1970 E-body. one 1968 C-body...make
> offer.
>
> A-engine intakes...we'll probably ebag store them...before i do that,
> give me and the ferts a holler...a couple
> 340 cast irons, a 360 T-Q cast iron and a big port aluminum (340-360)
> 340 Torker.
>
> B-cast iron intakes...one complete with 1965 330hp AFB 383 carb and
> manifold...pass the word to the 62-65 list.
>
> my mac.com account did not survive the transition to mobile me....so i
> have lost contact again with 62-65 guys.....
>
> B-cast iron intakes, one holley/carter, one T-Q....need one give us a yell.
>
> rob/ferts/phx...6237603452 or 6239373676 phoenix metro center area
>
> spread the word...i'll run this by the MML also
>
> thanks
>
> rob/ferts/phx
http://www.forbbodiesonly.com
-------------- Original message from rll <moparsandferrets@cox.net>: --------------
> Mopar stuff....
>
> Ferrets are cleaning up....
>
> 8 3/4 center sections, one 741 (2.76), three 742's open axle (3.23)
>
> $0.25 cents a pound and shipping.
>
> We can get $0.20 a pound at metal management...getting ready to load
> Bigger Red up for another run.
>
> Slant six engine...early 70's 225 spark plug tube style head, $ 0.25 a
> pound or offer, pick up only phx az.
>
> Factory ac/heat box, complete, one 1970 E-body. one 1968 C-body...make
> offer.
>
> A-engine intakes...we'll probably ebag store them...before i do that,
> give me and the ferts a holler...a couple
> 340 cast irons, a 360 T-Q cast iron and a big port aluminum (340-360)
> 340 Torker.
>
> B-cast iron intakes...one complete with 1965 330hp AFB 383 carb and
> manifold...pass the word to the 62-65 list.
>
> my mac.com account did not survive the transition to mobile me....so i
> have lost contact again with 62-65 guys.....
>
> B-cast iron intakes, one holley/carter, one T-Q....need one give us a yell.
>
> rob/ferts/phx...6237603452 or 6239373676 phoenix metro center area
>
> spread the word...i'll run this by the MML also
>
> thanks
>
> rob/ferts/phx