Leaf Springs Question

Hello,

which kind of leaf springs could I install into my 65 Satellite?
The originals are very weak and I want that my Satellite get a tight appearance like a Super Stock.
The front and the rear should coming higher.

Thank you in advance for your help.

Flo

Look at the pic that the status quo:
http://www.mopar-crew-gifhorn.com/Florian/IMG_0015%20(Large).JPG

I am not sure if the 65 takes the same as my 63 but my 63 took the same size spring as an A-body Dart. Nice looking 65. Ron

Flo, look for Super Stock Springs at Mancini racing or Summit Racing or ofcourse YearOne. You can also try the for sale section at the 62to65moparornocar website.

The front is easy and about 10 minutes of work...you can adjust the front arms by screwing or unscrewing a nut on either side. May I remind you that when you move the front up, driving-comfort will disappear (in combination with thinner tiressizes).

I got mine for my 65 coronet from a place here in michigan called mcveigh truck parts they had them in stock they are a stock replacement but they can also custom build for your application let me know if you want there contact info.

I just purchased a set from them for my '64. When they get installed,I'll give a product evaluation. Guess that takes care of my own thread about S/S vs. XHD units;that still may have pertinence to some folks,so I'll leave it out there for now.

ALLES, Er hat ein schön auto!

If you look in summit racing they have some short springs that they sell for small trucks for about 35 bucks I've used these by adding them to my stock springs many times and they lift about 2-3"

P.S. looked them up for you Pro comp # 13120 add a leaf put them under your last leaf. Good afternoon project, And they are the same width as your stock 65s.

Check out springs n things. I just bought a set from them for my '62 fury and I'm very happy with them, the Furys stance is perfect . They have about anything you would want for your '65 satellite. I not sure you would want to put ss springs on your satellite, but they have them, also stock height, 1'' over stock height, 2'' over stock height, ss springs, xhd springs, and so on - all for your '65 . I bought 1'' over stock height for my '62 fury, and wouldn't want to go more than that. They'll build just about anything you would want. If money is a issue, you can always buy air shocks (about $65.00) for a temporary fix , and save your money up for the springs. AND remember, if you haven't rebuilt your front end or replaced your bushings lately, you run the risk of NOT being able to raise the frontend. Here's the phone # for springs and things - 1-800-903-9019, and here's the web site - springsnthings.com. Hope this helps ya out.........

put some skinnys on the front , pie crusts on the back and a set of SS springs and you get this???

this setup looks great!

I used ESPO they havent sagged in 6 years. Remember that 62-65 have a 21" front spring segment. A bodys have a 20" and 66 and later is 22"

put some skinnys on the front , pie crusts on the back and a set of SS springs and you get this???

Which kind of tires you are mounted?
i´m looking for this kind of shaped tire (no slicks) which i can use street legal.

put some skinnys on the front , pie crusts on the back and a set of SS springs and you get this???

Hey 62...............How wide are your back rims?


Damn that's a fine looking automobile ! :yes:

the rims are 8 inch and the tires are 820-15 Radirs made by M&H:blush:

Hey 62, that is a bad-ass lookin' savoy!!! BTW is that Johnny Cash in your Avatar??? :blush:

I used ESPO they havent sagged in 6 years. Remember that 62-65 have a 21" front spring segment. A bodys have a 20" and 66 and later is 22"

62-63 have a 20" front segment & 64&65 have a 21" front segment