Brought the engine home.

The short blocks been finished since march but its been sitting at the shop where we're working on the '64.
We finally got most of the parts we need to assemble it so we brought it home last weekend so we can assemble it and paint it in the garage without having to drive to it. (the shop is about 20 minutes away)

Here's some pics,

This is where its sat since march. Oiled and wrapped up.
http://i121.photobucket.com/albums/o204/64MaxWedge/Picture117.jpg

Heres Pops laying the intake on just so we can get an idea of what its going to look like.

Valve cover and intake just laying there to get the "look"

What kind of #'s are you looking to get out of the engine?

And another cool 62-65 Mopar will be hitting the road soon. Looking real good Mike. :yes: Ron

What kind of #'s are you looking to get out of the engine?
It's a mild .30 over 440. It's just a hair under 10:1 comp. I'm hoping to be in the 450-500 hp vicinity.

LET the FUN BEGIN:old_school:

What shop did you use ?

what oil pan are you using.I know 62-65 takes takes a different pan than other b bodies

what oil pan are you using.I know 62-65 takes takes a different pan than other b bodies

Making a custom one if the stock one it doesn't fit the K-Frame:old_school:

"Measure 3x cut once"

What shop did you use ?
The shop is the garage at my dads work. His boss is letting us store and work on the car there.

what oil pan are you using.I know 62-65 takes takes a different pan than other b bodies

I'm using the stock pan from the 440.
The k-frame will have to be notched a little bit for clearance.

The shop is the garage at my dads work. His boss is letting us store and work on the car there.

My bad, I thought you meant machine shop. :sFun_doh2:

My bad, I thought you meant machine shop. :sFun_doh2:

It's cool. The machine work was done at a carquest shop that my dads uncle works at. I gave him all the parts and had him put the short block together while he had it there :wtg:

Hey Mike is that the Torker II intake ?? Ron

Hey Mike is that the Torker II intake ?? Ron
Yes it is. I wanted to go with the Holley SD but i couldn't pass this one up. My dads friend had it and wasn't using it. It only was used for a couple hundred miles until he switched to a cross ram set-up.
The price was good too. $20 :grin:

Looking like a nice start !

Nothing wrong with the Torker II as it a very nice intake. :yes: And who could pass it up for that price ! Ron

The waiting is tough no doubt about it. But when its all done its gonna be sweet. Mine was on a stand last year at this time. I could only afford one header at a time..Just kiddin