Which rocker arm shafts you guys use?

Do you guys, both wedge and Hemi guys use, the stock .150 wall rockerarm shafts or go to the heavier .180 or .250 Dechilles for high spring pressure roller setups?

Good questions all. And it's info that I'll need down the line. But to answer your question, I like the P4529101 for a big block with hydraulics

That part number is suplied to MP by Dechilles, it is reboxed and marked up....

I use SEVERAL different suppliers(What most will find out that Most Generally there are ONLY one or Two People that Manufacture the parts and SEVERAL that Finish them)..

I Use Keith Black and Dick Landy Parts on my HEMIS and am in the midst of changing to the Jesels..
I still use 273 Rockers with New Bolts and Locks on my Small Blocks...

SSH

If the "finish" you are reffering to is reboxing ding ding ding winner

Ken and the Former Landy crews use Dechilles for shafts each using different thicknesses for different applications.

MP we have already covered.

Anything standing out yet? :grin:

I am looking for recommendations for the following setup using iron heads and need rockershafts and arms, I will be running a .509 lift 292 dur. hydraulic cam with Ferrea 5000 series valves. Anyone?

I am looking for recommendations for the following setup using iron heads and need rockershafts and arms, I will be running a .509 lift 292 dur. hydraulic cam with Ferrea 5000 series valves. Anyone?



If You Don't Mind Adjusting The Rockers from Time To Time I Use Adjustables(Either Ductile OR Aluminum Whichever I find Cheap At a Swap Meet or Ebay,Etc...).If You DON'T Want to Adjust them Put a NICE set of Stock-Style or Mopar Performance Non-Adjustables On..
I Have Used the Stock Older HP or Very Good NON-MARRED Shafts On the Adjustable Rockers for YEARS without any problem...THE ONE THING YOU HAVE TO REMEMBER IS MAKE CERTAIN YOU HAVE THE OIL HOLES FACING DOWN!!!!I Had a Customer/Friend that bought a Brand New Set and Fried Them AND the Engine Due to Lack Of OIL...You Also Have To Remember You Will Have to Get Different Push Rods(Adjustable STYLE(Meaning a One-Piece Push Rod with a Cup On One End) That Fit Your Application For the Adjustable Rockers.

I Have I Believe some of Both Style Rockers and Push-Rods For Sale If You Are Interested P.M. Or E-Mail me..



SS