What are they? decals?
Right now they're just computer renderings of designs I plan to CNC carve in Aluminum and colorize them. The item you see here (the rounds) are Christmas ornaments (have a hole at the top to hang) and refrigerator magnets (they have 3 powerful rare Earth magnets in the back). I'm hoping this blooms into more than the item you see here. Custom valve covers, air cleaner lids, etc. Maybe some of my designs might make it to T-shirts. We'll see where all this goes. Right now I'm just trying to build a library of artwork that I can use to do these carvings. I hope to do some prototypes soon and will post when I do.
It's coming. It takes time to do the artwork. I'll post when it's done.
They are coming. The first one will be a rear shot of a 69 Roadrunner. That pic you see around that says, "You've Just Been Given The Bird". Then I'll do angle shots of the 1968 and 1969 to start with. I will eventually do them all, but this is my battle plan for now.
While I'm still working on 69 Charger 500, 69 Super Bees, and Roadrunner, here's a few colorized versions for the 69 Daytona.
Sorry about that. When I do my next prototypes, your Celtic Hammer will be in on that run. I'll post when done.
Thanks
The only ones I've made so far were my very early test pieces to test carving in Aluminum. I also started experimenting with coloring them. Here's the first test pieces. I hope within the next month I should have some new test ones done (carved and colored). On the 383 one, it was done for a customer so I blurred out the last 6 digits of the VIN number.
