• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by blazer 2010

  1. B

    67 exhaust hangers

    It just seems like a long stretch from the hanger at the back seat all the way to the engine without a hanger in the middle somewhere
  2. B

    67 exhaust hangers

    I would like to put another ex. hanger somewhere in the middle without putting a hole in the floor. It seems like a long length of pipe with just the one hanger by the back seat. what have you done
  3. B

    fibreglass fenders

    I don,t see any fenders on your web page
  4. B

    fibreglass fenders

    is there much work needed to install
  5. B

    fibreglass fenders

    has anyone used a glass fender for a 67 gtx etc. fit finish ,those kinda things.
  6. B

    67 blevd. quarter panel fix update

    Thought I would post some pics of my Frankenstein quarter fix and also say thanks for all the help on this scary project. Somebody applied a full patch panel over the old quarter so I ripped it of to find a nice mess. Found a new taillight section on here and closed my eyes and stated cutting...
  7. B

    trying to make my quarter panel round ?

    Just need to find a piece 9 feet long and 3 people to get those lines straight ,ha ha
  8. B

    trying to make my quarter panel round ?

    It,s not too bad now.I was trying to build up the hump in the center but what I needed was to define the curves at the bottom and the top of the center hump and now it looks like it taking shape.Now I just have to find a piece of pvc pipe that size and should be good.
  9. B

    trying to make my quarter panel round ?

    Thanks for the replys.I.m not adding much filler but is a section about a foot long that looks flatter.Can really notice it with a straight edge even thou I know the quarters are not straight but I can tell from the other side about where to be. This the mess,not turning out too bad for a first...
  10. B

    trying to make my quarter panel round ?

    of course that,s not my car but it is so nice I,ve been using it as a guide
  11. B

    trying to make my quarter panel round ?

    I ve patched my quarter panel on a 67 belverdere but one section came out a little flat on quarter panel and I,m trying to build it up with body filler to get my curve but I end sanding it away or I can,t get the filler where I want.It,s not too much for filler but it not right.Any suggestions...
  12. B

    12 inch wide slicks on a 67 gtx

    here is away without mutilating your quarters
  13. B

    1967 resto project

    coming along nice,I wish I could find a wheel lip for the quarter.I,ve been trying to re-shape an aftermarket one but not having much luck.I,ve been looking at other vehicles wheel lips to see if they would be a close match just to use sections of the lip to put on.A 70,s ford truck and a 56...
  14. B

    67 belvdere fr. bumper brackets?

    My outer fr. bumper brackets are rotten,will other models fit ?If not are they hard to come by ?
  15. B

    318 4 barrel intake advice

    The eddie 2167 intake lists that it is for 318-360 engines,do I have to still port match ?
Back
Top