Recent content by Demon 2048

I took these off my running 1970 car I bought last year as they were not correct for my car. Carburetors have been rebuilt with new gaskets, and replated. End carburetors have Pro Max metering plates installed. Comes with the fuel lines and brass blocks also. I only ran these carbs long enough...

Are you still looking for (2) 6-4-69 u joint straps. I have two of them if you do. Dale

WTB 2 1969 Dated U Joint Straps for a Dana 60. Let me know what you have. Common date is 10-7-69.

Put the old distributor cap back on and start from there. Recheck everything you took for granted. Firing order to plug wires. Did you also change the rotor? If so put the old one back on and reestablish the base condition and you will find your problem.

Ray did you find the correct idle solenoid for my car ending in 29? Dale

I would watch every video on the 440+6 pack on Holley 2300 carburetors from Harold Demes. This will answer a lot of your questions from a guy that rebuilds these carbs daily. If you set these carbs up to stock with the correct #31 squirter and #64 main jets and your idle control screws work as...

Just clearing out the cobwebs but here goes! All carbs are for a 1969 1/2 A-12 Cars. The 4393 Carb is the front carb and has a metering plate (#34) with the same size holes in the bottom of the body of the plate. Plate is attached to the body of the carb by 6-clutch heads screws. The 4394 is the...

Hello

Looking for a Holley 4391 center carburetor. Let me know what you have. Thanks

Wrap a ratchet strap around the top and bottom and compress the shock until you get the bolts in the upper and lower holes.

I bought a new NOS Correctly dated for my car from ECS Charlie is the person 636-536-2221 extension #2. Took about three weeks to get it. Dave Wise approved.

Try 440 Source.

Please send me your email address and I will get you paid ASAP using PayPal. Dale