Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi Builderguy!
I bought the urethane bushing kit from Energy Suspension
Prothane are the same stuff/quality.
I installed them on my 75 Road Runner they work great and help to stiffen up the front end a little bit, no harsh/vibration feeling while driving.
The OEM/rubber style are too $$$ and...
Hi!
Not at all!
The ride is smooth but firm more like newer car
I got 235/70/15 for front tire and 275/60/15 back no skinny so it's a pretty nice ride
I was afraid too, if I use the bigger bar it will be too rough
I e-mailed Firm Feel and they told me to use the 1.06"...... No regrets!!!
They...
Yes it can be done !
That's how I did it on my 75RR
Just loose up the rear bolt just enough that the old old would drop off and after the new one are in place, just tighten the bolts a little bit
And do the same for the front
After all of them are replaced make sure to tighten/torque the 4...
I got the 1.06" diameter T-bar from Firm Feel for my 75 Road Runner with 440
I installed the T-bar and replaced the lower control arm bushing and boxed both control arm (the upper arm bushing and sub frame bushing where replaced a year ago)
And i got a bigger sway bar 1 1/8 " from PST a few yrs...
Big block or small block?
If Big block 400 or 383 the usual headers for B body 68 to 72 will work
If you got a 440 they wont !!
They will touch the steering box and be really tight .....I know I went true this problem when I replace my 383 for a 440
So I install a set from Schumacher Creative...
I upgraded the front end a few years ago and I used the inner/outer tie rod and sleeves from the C body
The tie rod threaded part are bigger (less flex) fits right in the spindle and center link .
Just keep the oem idler arm and pitman arm and everything work great!
Great work Darter6!
I did mine back in June what a difference on the ride!!
Thigther feel in the front end not much difference in road noise ( I keep rubber bushing on the upper cont. arm and lower arm)
The T-bar bushing where easy to put on didn't have to release the tension to put the new...
Nice photoshop! LOL
This is my "Bird" after restautration
Mind you a "clone bird" since up here they where few and far between who survive the harsh weather in the Great White North!
Top picture 2011
Carlisle 2015
Yes! Both the same grill 75-76 only in 77-78 they switch for the quad lights and different grill with the "Plymouth" molded at the top the whole width of the grill .
All the 75-76 Fury use the same grill they both have 2 holes on the left to fix the little Bird
- - - Updated - - -
All the 75-76 Fury use the same grill they both have 2 holes on the left to attach the little Bird
You keep the same bumper !
The Dodge Coronet has the blinkers in the bumper the Plymouth Fury in the grill this is the differences between both model
only in 77-78 Plymouth ended up with the Coronet bumper style and a plain grill no blinker
Bad decision IMO since from 77 the Plymouth look...