• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

I have never messed with bars before

74charger07ram

Well-Known Member
Local time
5:42 AM
Joined
Aug 14, 2013
Messages
417
Reaction score
108
Location
Weatherford Texas
Mine are off the car (74 Charger 318 car) and they both have a slight bow. I roll them around on the shop floor. One side touches the floor, 180 around 3/8" off floor. Is this good or bad? I guess I should add torsion bars.
 
****, and I thought this was a subject about Taverns, aka bars.:(:(:(
 
Pics would be a plus, but from your description sounds like you need a new set of T bars
 
ya...replace em.maybe even upgrade while you are at it.
 
****, and I thought this was a subject about Taverns, aka bars.:(:(:(

PastorPriestRabbiWalkIntoABar.jpg
 
I am a magician.

Every Friday afternoon, I turn into a bar!

That happened to my '66.

A friend happened to have an extra and it was for the correct side.
 
Here's the downside... you have a 74. Be very careful because the 73 and later bars are different lengths than the 72 and older ones, but a lot of dealers list bars as 71-74. Make sure you're getting 73+ bars.
 
yes, I have noticed that. Thanks for the confirmation. I see that P-S-T does not have them. I just miked mine and came up with 0.92 and that is after I blasted tham.
 
saw where FF would rebuild the old ones for $200 + shipping to and from. I'm thinking because I need to replace them might as well up grade to larger. But larger is more $$$.
 
Long shot but you could look for Cordoba/Fury/75 and up Charger bars at a U pull.

I see one of those about once a year on my 4-6 yard quarterly rounds.
 
Auto Transport Service
Back
Top