• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB trunk interior side panel clips

Status
Not open for further replies.

FU64RY

FBBO Gold Member
FBBO Gold Member
Local time
4:31 AM
Joined
Nov 5, 2011
Messages
3,109
Reaction score
3,208
Location
York Pa.
Feedback: 12 / 0 / 0
6 band steel clips that hold the cardboard in place. 62/64.
I did try Joe Schuchy..........Has not answered his phone in several days.
I did go to Hershey on Thursday and he does not vend there.
I could make them if I had one to work off of.

62 clips.png
 
I think I have a few. I'll look and get back to you.
 
I have them on mine if you can't find any. I'll let you borrow one for a template. I think I'm missing a couple.

How about the push-in button heads, do you have them? One on each side below the hinge.

Someone making the side cardboards?
 
Hay! KK;
I'll let you know on the clips, just one for a pattern will be good.
REM does the trunk panels. I think my cost was $73 + shipping.
I used the modern push trim plastic fasteners, worked out perfect. I think that the package tray buttons are the same and they are reproduced.
 
Special thanks to RICK62.
He sent me 4 at no charge and free shipping. Too bad I was not in need of some Max Wedge exhaust manifolds.
Still need two..........they are super tough spring steel and probably not easy to reproduce.
Yes I did offer to pay.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top