Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So looking at the K 7103 offset looks like in the picture that the end cap large and small washers do not have the seriations made into them! Like the factory or even the generic ones
so how do you keep them from turning? Other than tightening them
Up really well?
dcmason69
Great info 1 Wild R/T
Thank you all for sharing your experience and knowledge this is a big help for me.
Maybe one more question R/T
Do you get 2 offset kits to do all 4 corners or 1 kit and do just fronts?
dcmason69
So installing the offset bushings I will want to have the thickest part towards the outside as I press them in so to
gain more tip out or position different?
Where are these clocked at?
dcmason69
Thanks again dvw good tips !
Always more than one way to skin a cat!
So it looks like Moog or proforged for the bushings!
I looked at PST website and looking at pictures can see stamping on end. Made in Mexico.
If they all come here who is going to make these parts...
Thank you for your reply
That would be my go to is Moog
Good advice for the struts! Appreciate your help.
A friend told me that the offset bushings are hard to keep tight that they will tend to turn and get out of adjustment! Do you have a trick for them?
Thank you for your help...
What’s a good quality upper and lower
Rubber bushing?
Iam thinking it’s probably a crap shoot anymore, mostly all manufactured over seas ! What have you guys used that you had the best fit and quality ? MOOG. FROFORGE
MASTER PRO MOV0tech AC DELCO
and the list goes on.
Thank you...
Thank you for the info
I did not know that, you are a plithera of info
Thank you for the information.
You are a plethora of knowledge!
No I do not plan to drive in winter
So I am thinking using original steel
brake cables, I am thinking they will be easier to work with maybe I will try to...
Ok on the cables
I agree the stainless 3/16 fluid lines are hard work with, I made all my own using ni-cop and covered most of them in gravel guard s/s spring.
Thanks again
So you have worked with the stainless?
If so they installed ok?
Iam just concerned if the stainless are a PITA to get to lay nicely!
Thank you for your input
Which cable is preferred steel or stainless steel? Is the stainless a pain to work with will it lay the same as stainless?
Need help deciding what to buy
Thank you
Looking for I believe should be a non vented gas cap for 69 coronet !
Do I have to spend 40 bucks to get one that works or can I get a lesser price for one that seals and doesn’t leak? Classic ind. 8 dollar cap leaks.
Which one works? I will spend extra money just need to know which one to...
Need help deciding which new e brake cables to buy.
OEM steel or Stainless steel?
Anyone have experience with them?
Naturally I would think the SS is best
But my experience with SS is could be stiffer / harder to work with and not lay as the factory did ! Has anyone put on SS? And what was...