Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I replaced all 3 10X10 doors last fall on my shop. I had a buddy helping and we did one per day. Really helped with the comfort/heat bill last winter. I went from 1 1/2" polystyrene to 2" polyurethane and added windows to the top section-what a difference! I can work in the morning without...
I have become a cheerleader for the HEI conversion. It works very well and is not very noticeable. As far as the new harness is concerned, I like to build my own.
Mike
I can only remember one, my first Mopar. 1956 Savoy L-6. I was "racing" a buddy with his 1950 Plymouth when I developed a rod knock. General consensus among my dad's buddies was to remove the rod/piston assy. and drive a properly sized piece of wood in place of the offending rod assy! I did not...
You don't. The SG uses a set of thrust "buttons" held together with a split pin. Look for a "blow up" of a SG and you will understand what I am describing.
Mike
If you have the common 727 build manuals there is no reason you can't attempt to build. Cope sells good parts too. For sure, purchase a billet steel front clutch retainer.
Mike
Most people back in those days only had one vehicle, so a trailer hitch was added to their car. I installed a lot of them back in the old days. Today I see all kinds of PU trucks towing loads that exceed the truck weight by 2/3 times. On the other hand, front wheel drive is not optimal for...
I, also wanted cup holders and a CD player/stereo in my 65. So, I built one and my wife upholstered it, snuck in a spot for tissues and a digital voltmeter/phone charger too. I used 1/2" MDF board.
Mike