Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I will need better tires. These tires were new when gas was under $1.75 a gallon.
The rear seat is ratty.
I've had it out for years...I replaced the center of the trunk floor and had it out to avoid catching it on fire from a random spark. I may reinstall it just to block off the trunk...
]Cool show-and-tell, but neither help me in any way. LOL.
I went with the Holley in-tank pump that goes into the OEM fuel tank. Installing tomorrow and then I'll let y'all know how it goes!
Well that helps... If you need to replace the pinion seal you just torque the pinion nut, you don't need to worry about a crush sleeve allowing the bearing reload to change...
Does "hydroboost" mean power brakes? I've got a manual setup. Somewhere I read that the big Viper brakes behave like self-energizing drums. Have you found that to be the case?
The Doctor Diff kit says "2003 and up," does that include 2013-2017?
I think the nut torque is around 240 /ft lbs the rotational torque is about 23 inch /lbs for a new bearing 15 inch/lbs for a used bearing
Turning torque meter
2010 bmw 335d
Diesel 3.0 inline 6
Fully deleted : jr2.5
Trans tune :stuphin
3in dp to full stainless ATM exhaust
Newer front and rear tires
Newer brakes
110,*** miles owner since 2019 and 92k
Park during winters (other vehicles to drive)
Car is decently fast did run it at the track high 12s...