Search results for query: *

And some of the harder parts to find especially if you need one of the roller brackets.

need help on hooking up outside door handles to the latch ***. on a 1965 ply sat.

It's going to run better with #6 firing. I'd start with a new plug in #6. Put a thin piece of tape on the balancer at 35 degrees BTDC. You don't need vacuum advance for cam break in. Just start it and get it to 2,500 steady and set the timing to your mark. Then vary it occassionally up and...

Congratulations to 'memike' (FBBO) for being the only player to correctly pick #22 Joey Logano to win the 2024 NASCAR All-Star Race. He picked up -5 bonus points. Congrats also to 'cuda20' (FABO), 'Sublime one' (FABO) and 'Yunick13' (FABO) for correctly picking race runner-up #11 Denny Hamlin...

Quite the find!

Different bellhousing bolt pattern.

Also have an A body 4 speed. Needs levers and side cover. Turns smooth and internals look great. Outside is very rough with heavy heavy pitting $450 obo

A cacophony of clatter!

If you are new to this game, get to know Joe Suchy in Fairburn, Ga. He is THE 1964 Plymouth guru. He sells reproduction and used parts for these cars. He is a super guy to deal with.

Yes, I have the original, but I don´t know if it´s the correct one also. It has too play but when installed there is more room to the torsion bar. (1/4 around). The new one seats deeper on the steering gear shaft. 1-1/8 shaft splines diam. For B bodies I have found Moog p/n K780, K7075 , K7076...

What happened to your YouTube channel?

I've got a nice inside and out, it is original but when I took cover off a few years ago when I had plans to put it in my 67 coronet it looked so clean I was just going to put it right in the car, turns smooth. I was told it was from a 72 or 73 road runner I can't remember. But I'm including...

:thumbsup: A buddy back in the day replaced a 318 because it ran like sh¡t. The replacement ran the same. Oops, he reused the same distributor.. Diagnoses trumps the cash shotgun effect every time.

On the top of Pikes Peak, the are several live cams you can check. Of course, it's still snowy there but it's cool to look over the clouds down upon the city of Colorado Springs. Pikes Peak Cameras | City of Colorado Springs

Man, I Bought my 64 Sport Fury in 1968. And unfortunately sold it 4 years later. That was a long time ago.

What a find! Power windows, too! I think Plymouth called that colour Mahogany Metallic.. It was a one-year-only colour, and only on Plymouth. The 1964 sales brochure shows a car on the cover like this. A friend of mine up here in Ontario has a Windsor, Ontario-built 1964 Sport Fury in the same...

Just remember, hardened urethane doesn’t often play well over the top of old, non-hardened enamels and lacquers from 40-50 years ago. So to use hardened urethane it’s advisable to strip down to metal or use an epoxy primer to seal with. You might get away with spraying urethane directly over...

Are you sure its DOT 5? or 5.1? DOT 5 is silicone based, DOT 5.1 is compatible with DOT 3 and 4.

I agree but I don't want to run it to much to diagnose because It still hasn't been ran for the 20 min break in

**UPDATE** Thanks to everyone who offered insight and helped! Ends up it was something to do with the firing and the timing. The vacuum advance was seized up. I ended up going with a Firecore distributor kit and a set of perfect fit plug wires and changed the spark plugs again. It came with the...