Search results for query: *

looking for a little help with 440 engine in the super bee I bought I dont have a lot of info on the cam used this is what I do know 440 bored .060 over the heads are from a 73-73 motor home no porting visible on intake or exhaust ports heads were re-furbished and have the hardened seats...

I am rebuilding a clucth type suregrip that has broken gears. Dr.Diff has a replacement gear kit with all the gears for $175 but the carrier case has four of the alignment tabs broken off around the outside perimeter. will it still be ok to run.

has anyone used the rev-n-nator or the FBO igniton box any input of either one

had 8 and 15/16" pushrods that seem too short, had 5 threads showing on the crane rocker adjuster. ordered a set of 9.125 now have no threads showing, shoud I not use either and maybe order the 9.030

I installed disc brake conversion on front original all drums. I purchased an adjustable proportioning valve and installed it on the rear brake line directly after master cylinder and before the distribution block. after reading helpful advice from this forum I found out that this valve...

my winter project changed dash to white gauges blue LED lights convert amp gauge to volt gauge installed updated circuit board for dash and tach removed clock and made an aluminum face plate with air/fuel ratio meter and shiftlight that is adjustable with same clock adjuster hole and some...

1970 superbee 440 with rallye dash gauges I installed updated circuit board with built in 5 volt limiter, that fixed my fuel gauge. I grounded both temp and oil gauge for a couple seconds and they both went to full sweep. I checked voltage out to wires on sending units and have 5 volts on...

I have new yearone dash harness for 70 bee rallye dash there is an extra group of wires that are not on my original harness larger gauge wires with a post type terminal. two blue with white tracer on one terminal and two lt green on the other terminal there is also an extra plug.

i have a new yearone wiring harness for 70 bee everthing matches except one extra group of wires they are heavier gauge and doubled up with post type terminals one set is dk blue with white tracer and the other set is lt green. there is also a extra plug in the group. looks like they...

heard they made a six pack fiberglass hood you could buy from skatpack catalog in the 70s. this looks like the one. might try it on my super bee