Search results for query: *

Hi group do I need special paint for the engine compartment W1 alpine white for 1969 GTX. I have the engine out, I want to repaint the engine compartment it was all crack up I already taking down to bare metal in the engine compartment. thanks for any help CRAIG

Buy a steel crank for the shortblock and steel crank balancer

and which way do the curve washers go curve facing up or down? were did put the washers under the rocker shaft 2 and 4 location if not what location? Rocker Arms and Valve Train: Adjustable rocker arms must be used with cams having greater than stock valve lift. We recommend original equipment...

were did put the washers under the rocker shaft 2 and 4 location if not what location? Rocker Arms and Valve Train: Adjustable rocker arms must be used with cams having greater than stock valve lift. We recommend original equipment or aftermarket adjustable rocker arm assemblies, along with...

thanks I know were the studs went the washer seem to be a tight fit on rocker shaft instruction don't say anything about them thanks again

Do I use 1 or 2 Intake Manifold gasket per side on valley pan on Torker Intake Manifold I also have a Edelbrock Torker Intake Manifold for my 440 my Intake gaskets kits come with 4 intake gaskets and a valley pan do you put 1 intake before and after the valley pan? thank you

Were do you install the big washers included with edelbrock rpm head 60829 I have a set of edelbrock rpm head 60829 for my 440 each of the heads come with 2 studs and nuts and 2 big curve washers set come with I see were the two studs go but were do those 2 washers go and what side does the...

not funny

what a good brake in oil thank you

i meant the right front brake line away from the firewall stock location and away from the rear of engine sorry for the mix up thank you

i meant the stock location of right front brake away from the firewall away from the rear of engine

Hi do anybody have have photos or diagrams how to reroute the right front brake line on the firewall. On a b-body so I can go to the drags race. I have a 69 GTX last time at races a few years ago they told me that had to reroute my right front brakes line. thank you

thank you very much I order a set spent many hours at many vendors wish it was easy as rod bearing

Help need part number 69 block 440 main bearing -.010 I've been looking for mains bearing that has 3.600 thrust bearing most ads list all years 59-78 or that don't say . I read in 74 they when to a 3.880 thrust bearing #3 thank you my friends

I took apart my 727 BB transmission 3 or 4 years ago I have 3 or 4 transmission in parts laying around i'm I suppose to use a accumulator spring I forgot if I had one. I have a cope CTR -22X Reverse manual also have 727 low reverse billet servo kit also have a 5.0 kickdown lever also can I...

What are good head gaskets for a 440 for street and some drag racing Edelbrock 60829 - Edelbrock Performer RPM Cylinder Heads 75 CC thank you

5421416120676854 5% DISCOUNT

They might not be drill out for a manual trans. but all will fit a automatic