• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. 69 GTX

    Trick flow 240 Heads with Factory Six Barrel Intake

    https://www.forbbodiesonly.com/moparforum/threads/trick-flows-on-the-440.107369/
  2. 69 GTX

    69 gtx

    Manual disk, 15/16, everything new. I removed proportioning valve. Next if that doesn't work I'm going to remove distribution block. If it still doesn't bleed then it must be the mc.
  3. 69 GTX

    69 gtx

    Well I went another round with the brakes today. So I removed all calipers and have bleeders oriented 12 o'clock. Same problem as before, sometimes a hard pedal when simulating a panic stop, but really soft on a slow brake press. I can hear the chatter again and isolated it to the proportioning...
  4. 69 GTX

    69 gtx

    Believe me it crossed my mind!
  5. 69 GTX

    69 gtx

    Me today.
  6. 69 GTX

    69 gtx

    So in order to finish on good note today I put the splash shields on. I got the hardware kit from Mega Parts. It's nice to get stuff that actually fits. I put some rope caulk on the top. Tip, get yourself a leather punch, they come in handy. I used it to locate the holes in the weather strip...
  7. 69 GTX

    69 gtx

    I really didn't want to pull it with brake fluid in it. But seemed like the only option left. And yes, after getting it out it was tripped. I pulled it apart to make sure there wasn't any debris in it. I put it back together, centered it, then put the stop in to hopefully hold it in place.
  8. 69 GTX

    69 gtx

    So the brake block saga continues... Ordered a shuttle valve stop off of Amazon, strike 1, wrong threads. So I turned it down on the lathe and rethreaded it to 7/16-20, strike 2, I still can't see to get the shuttle valve centered to use the stop. I even pulled the bottom plug to try and use a...
  9. 69 GTX

    69 gtx

    Battled with bleeding the brakes some more today. I tried calling Dr. Differential but he isn't taking calls. So spent the whole day emailing back and forth. He said I had air in the line. I'm thinking I have a proportioning valve problem. If I turn key on, brake light comes on. Also brake pedal...
  10. 69 GTX

    69 gtx

    Factory on right, REM left. I modified rubber for notch and added a new hole.
  11. 69 GTX

    69 gtx

    Got the splash shields notched. The R.E.M. gasket kit doesn't fit for sh*t. Holes don't line up, plastic button fasteners are to small. You'd think something this simple would be correct.....
  12. 69 GTX

    US car tool inner fender brace interferes with splash guard on 69 GTX.

    Anyone else have this issue, and how did you remedy it? Thinking I should make a slit for it on splash guard. Anyone run into this? Thanks!
  13. 69 GTX

    69 gtx

    So I put 7 gallons of gas in the tank hooked up the battery. Gas gauge doesn't work...... Also started working on front fender inner rear splash shield. Well my US car tool brace interferes. Any had to deal with that?
  14. 69 GTX

    69 gtx

    Worked on bleeding the brakes. Better but not good. I think I have something going on in the brass block under the master cylinder. If I hit the brake pedal like a panic stop it's pretty firm and I can hear a click from the firewall. If I apply the brake slowly it goes almost to the floor...
  15. 69 GTX

    69 gtx

    Just need 2 more 3" & a 2.5" for H pipe.
  16. 69 GTX

    69 gtx

    Got my band clamps today, they look much better!
  17. 69 GTX

    69 gtx

    Secured brake lines today. Fixed a couple line leaks. Then tried to bleed the back disc brakes. Didn't have much luck so removed the calipers and filled them with fluid and reinstalled. My pedal pusher left so I'll try again tomorrow. Has anyone had trouble with the new brake valve? It might...
  18. 69 GTX

    69 gtx

    Getting closer....
  19. 69 GTX

    69 gtx

    Ordered some band clamps for the exhaust, the ubolt clamps look like crap.
Back
Top