Search results for query: *

Hi Guy's, It's been a few years since I needed your all's help but I am having problems on how to remove the master cylinder reinforcement plate on my 69 Superbee with Manual drum brakes. I have the nut off on the engine side but whatever is holding it on the inside, I can't seem to locate...

Looking to buy new shoes for my Super bee, any recommendations on who to buy from? Rockauto a good place for brake shoes? Thanks! Dave

I'm not even sure where to start with this issue I or we are having with sedan door window replacements for 69 Super Bee. I am so sick and tired of ordering parts and not fitting or holes in wrong location, my title should have been cuz words! Here's the problem and I know at least two on here...

Hi guy's, Question, I am in the process of installing new sway bar bushings and I am getting ready to paint. Should I paint the bar and bracket separately or install bushings in brackets first then slid them up to there position then paint? Or slid bushings on bar first then brackets onto...

Hey all, I have a 69 383 and last fall I pulled the aluminum intake off and proceeded to put a new valley pan gasket on and put my factory cast iron intake on to see how it runs. Now I am ready to install a new aluminum intake and the question is since I have already torqued down the bolts to 40...

Hey guy's, I have a 69 Super bee with bench seat and have a question on the springs that goes underneath for the return mechanism. I'm sending a picture and was wondering if these are the correct springs? Thank you, Dave!

I was watching Nick's garage on YouTube last night and he was streaming live and mentioned our website, For B bodies only and I thought that was pretty cool! Anyone else see this?

Hey guy's, I bought a carb. rebuild kit for Edelbrock carbs a couple weeks ago and the accelerator pump rubber cup is black and not red that came with the kit. Is there any differences in these two and if so what is the black cup for? Thanks, Dave

Hey guy's, Has anyone ever experience a leak using these Edelbrock Heat insulator gaskets. I have never had a lot of confidence in these working on all types of manifolds why I have even sprayed WD-40 on both sides so they would not stick to the manifold or bottom of carburetor. You all put them...

Hey guy's, A couple months ago I put new and taller tires on my Bee, went from P235/60/15 all around to 225/70/15 in front and 235/70/15 in back which amount to 26.3 tall tire before to a 27.4 in front and 28.0 in back. I went to the alignment shop to get it aligned and here are the numbers he...

Hey guy's, Anyone know where I can get the clips that hold the trim piece on at the front part of headliner where it meets the windshield on a 69 Super Bee or B bodies? Thank you! Dave

Hi guy's, Does anyone know if Edelbrock came out with a tuning chart or jet chart for these carburetors yet, I'm having a little surging issue in 2nd gear on my 69 Superbee 4 speed when going up a slight incline that I'm sure indicates a lean condition. Cruise seems okay so I'm thinking 4 to 8 %...

Hi guy's, I just replaced tires on my 69 Bee from P235/60-15 on all four wheels to fronts P225/70-15 and rears are now P235/70-15. The prior tires were 26.1 inches tall and now my new front ones are 27.4 and back ones are 28.0. After I went for my first test drive before making any kind of front...

69 Bee 383 battery ground connection at intake bolt, cable under return spring bracket and bolt with lock washer? star lock washer? or flat washer or no washer under bolt? Thank you! Dave

Hey guy's, I have so many bolts laying around that are original and I decided to clean some up and reinstall on the "Bee". Could someone please take a picture and post it of an original distributor hole down clamp bolt and would it be a 5/16-18, 3/8-16.. for a big block 69? Thank you, Dave

Hi guy's, Can someone please tell me what type and what length of negative battery cable goes on a 69 Super Bee 383? There are 23 and 25 inches long with square or round head. I am looking for a concourse or reproduction and not aftermarket stuff. Thank you, Dave

Hey guy's, I need to touch up some white letters on my tires, what's the best product to use? I need something that will fill in some small porosity in the tire at the letters along the lines of some kind of paint! thank you, Dave

Hey guy's, Just need some help in looking for tires for my Bee. Does anyone know or have P235/70R15's on their Bee or if they will fit okay in the front? I know they are a 9.5 wide x 28.0 inch tall tire. I want to get away from the P235/60/15's I have now and I want to keep the same width but a...

Hi all, I'm looking to buy new vent glass for my 69 Superbee, who sells the best show worthy glass? Thanks, Dave

Hi guy's, Can anyone help with this little issue I have dealing with the front bench seat in a 69 Superbee the spring/springs that go under the seat for the up and back mechanism. Are there one or two springs and does anyone have pictures or direct me to original dealer pictures of the location...