Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I need a little help if I may get it. I am a beginner at reading plugs. The attached plug was pulled after cruising around. Timing is set at 15 initial and 35 total., The enginge is a 472 stroker with a Quick fuel 780 vacuum secondary carb. Vacuum advance is being used. Hughes cam Lift .571 and...
I believe it was in the first or second Mopar Enthusiast magazine. In knuckle bustin section. I need a copy or pdf or screen shot or link to it please thanks.
My 1973 charger se has all the a/c stuff on the car but on the fender tag there is no mention of the air conditioning option. It looks as if it was stock and came from the factory this way. Is it possible that it was never listed on fender tag?
I purchased a in dash tach from classic industries for my 1973 charger. The tach needle bounces every so often. Hard to describe but when driving the needle drops or bounces and then corrects it self. Anyone ever have this happen. I have a R/T garage box (rev n nator box) and a firecore...
Trying to get the timing adjusted on my 73 Charger. Looking for a starting point. I presently have it set at 18 initial and 35 total and it seems dead under 4500 rpms. Its a 470 stroker build with a hughes cam (seh3236bl-10) .571 intake .582 exhaust .236 duration and 110 lobe separation. It has...
I have a Mcleod RST twin disc clutch set up on my 470 stroker, 23 spline tranny. My problem is that the clutch does not fully release and reverse grinds and its hard to get in to 1st. I have had the clutch out 3 times. The first time it was taken out to inspect and check assembly and put back...
I ordered the pistons and rings and decided to go another direction with engine build. I paid $730 will sell for $550. These pistons can be used for a 440(.055 over) build and a 400(.035 over) build. These are brand new never installed. No damage.
Icon Piston IC-828.These pistons are a 4.375"...