Search results for query: *

I have a Dual Point Distributor from my 62 383 for sale with coil. $85 plus shipping.

For Sale: 1962 Dodge Polara (vin: 5422164227) The good: Restored in 2005-2006. Has a 383 (rebuilt by Ben Danhoff) in 2005 and has app. 8,000 since the rebuild, See the photos for details. It has dual Carter AFB’s. New seat covers and headliner. I have added a Holley Blue Electric fuel pump...

I have 62 383 with 2 four barrel carbs. They are AFB's, 3258 and 3259. I am installing a Holly blue electric pump and regulator. The instructions say it is set to 11 PSI. I know the old mechanical wasn't near that high. What would be a good setting? 5-7 PSI? I am installing the electric pump...

I thinking about going to an electric fuel pump on my 62 Polara (383, dual 4's). Anyone have pictures of their set up.

I weighed my 62 Dodge Polara with a 383, dual 4 barrels with cast iron manifold, Max Wedge up swept exhaust and 3 inch exhaust, front disc conversion, Crager 15 inch wheels with 255-70's on the back and 225-70's on the front. Full tank of gas. Two lawn chairs in the trunk (maybe 30 Pounds.)...

What is the purpose of the coil spring (screen door) that goes around the drum on the outside? I am cleaning up the read drums and mine are really grungy. I went RockAuto and the drums they sell don't have the springs nor do they have the grove that they go in. I think I'll leave them off.

I have a 1962 Dodge Polar with a 383 with max wedge upswept headers. See picture. I have put disc brakes on the front. The problem is the new dual master cylinder will hit the LH exhaust manifold.The old fruit jar master cylinder only has >1/2 inch clearance. What are the solutions? 1. Can I...

Vehicle 62 Dodge with 383. I put in a new cam and had the alternator off and back on. On restart it would not charge. Trouble shooting I found the FLD terminal loos at the Alternator. Took it off and found the Brush wire was pulled in to. I got a new Brush and installed it. Still no charge. I...

I have a 1962 383 with Dual 4 Barrels, 3 inch exhaust, 10 to 1 compression ratio, 2500 Stall and a 3.91 rear end. I presently have a Comp Cam 21-222-4 with 218/224 degree duration with 110 lobe separation. I also have power brakes. I am only looking for a car show wicked idle. No racing. Has...

I am building a 20X30 pole building that will hook up to my present garage. I am limited on size due to property lines and sewer lines.

Where is the timing mark pointer on my 62 383? Drivers side or passenger? My damper is degreed all the way around.

I have a '62 Dodge Polar with a 383 with dual 4 barrels. I need to replace the air cleaner elements. This so say was a dealer installed option in 62. The engine combo is listed in the NHRA Specs Sheets. I can't locate any paper elements. NAPA P/N 2030 is suppose to fit but is 1 inch taller. But...

62 Dodge Polara 2 door hardtop. 383 with 2each 4 barrels. 727 transmission. 3.91 sure-grip. I had a bunch of Mopars in the 60's and 70's. 64 Plymouth Sport Fury, 64 Polara, 69 Barracuda with 340 S, 72 Duster and then it went down hill to 79 Valarie station wagon and an 87 K-Car. I always...