Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I found the same issue and found low voltage at the sockets. Traced it up to the connection at the kick panel and found the same low voltage. Fuse block same thing. Have pulled the bulkhead connector apart yet but that's the next check.
Was able to test voltage at the 6 pin plug behind the kick panel. Same wacky voltage numbers as the rear. Then took the fuse box down and have full voltage at all circuits. I'm guessing that would lead me to the turn signal switch? Stop/turn lamps are what I meant to say when I originally posted.
Thank you all. I saw there was a 6 prong connector in the FSM but couldn't figure out where it was. I will check there and then the fuse box, then bulkhead connector (although I'm afraid to touch it). I'll report back what I find.
Matt
The voltage at my taillamps is around 8-9-10 volts, fuses are clean, ran a ground wire from the battery to one side and no difference. scratching my head on this one.