• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. A

    Replacement fuse box

    Does anyone know if the original style fuse boxes are reproduced? Looking for a 1970 box for a Coronet
  3. A

    Steering box mounting

    I replaced the idler, which was shot. I bent the lower aspect of the idler mount down about 1/16" (the new idler wouldn't fit without this adjustment. I also did the steering box shim modification. I now have 1/2" throughout the range of steering. The trans mount was new and the motor mounts...
  4. A

    Installing rear shocks

    Is there a trick (or a secret wrench) to hold the rear shock nut in the crossmember? A short socket is too short for the bolt end, a long socket doesn't fit between the crossmember and trunk floor, an open end won't fit in the crossmember lip. It came off easy enough, Thanks
  5. A

    Testing shocks

    Were original shocks for a 70 gas charged? If not, are they not expected to self extend? Thanks
  6. A

    Testing shocks

    I have a pair of NOS shocks that have been sitting in their box for 4-5 years in my garage (30-40 years before that somewhere else). When compressed they are smooth but don't extend on their own. Are they shot or still usable? Thanks
  8. A

    Steering box mounting

    My centerlink is hitting (rubbing) my oil pan. I came across this fix but it was on a cuda-challenger site. The steering box mounting bosses appear to be at different angles than a B-Body car (1970 Coronet). Are the mounting angles the same? Thanks
  9. A

    Exhaust tip mounting bracket

    Hello, I'm looking for the bracket that the exhaust tip hangar attaches to (not the actual hagar bracket). Does anyone have any idea if these are reproduced and where I can find them? For a 1970 Coronet R/T. Thanks .
  10. A

    Correct undercarriage restoration

    Can someone in the know post the correct sequence of painting a 1970 Hamtramck Dodge. I am particularly interested in the primer dip to body color and the amounts of undercoating/sound deadener application in the front and rear wheelwells. Photos would be great. I have gone through multiple...
  11. A

    Who sells a stock 727 pan?

    Does any company sell a stock 727 pan? All I can find are deep/chrome /finned pans. Thanks
  12. A

    Distributor install

    My #1 spark plug wire is at the #3 spot on my distributor cap. And to get proper timing, the vaccum advance is rotated all the way up to the coil (440). Does this mean I'm 180 degrees off on the proper installation on the distributor? Thanks
Back
Top