Search results for query: *

I would like to put another ex. hanger somewhere in the middle without putting a hole in the floor. It seems like a long length of pipe with just the one hanger by the back seat. what have you done

has anyone used a glass fender for a 67 gtx etc. fit finish ,those kinda things.

Thought I would post some pics of my Frankenstein quarter fix and also say thanks for all the help on this scary project. Somebody applied a full patch panel over the old quarter so I ripped it of to find a nice mess. Found a new taillight section on here and closed my eyes and stated cutting...

I ve patched my quarter panel on a 67 belverdere but one section came out a little flat on quarter panel and I,m trying to build it up with body filler to get my curve but I end sanding it away or I can,t get the filler where I want.It,s not too much for filler but it not right.Any suggestions...

My outer fr. bumper brackets are rotten,will other models fit ?If not are they hard to come by ?

I have a pretty much stock 318 with good dual exhaust and would like to to switch to a 4 barrel intake.The swap meets are starting up soon and would like to know what I should look for,is there a good stock one to look for or on a 318 or would anything be an improvement .

What is this called and where can I get one and how do you install it.It's some sorta roller or ? to stop the window from falling out.

I,m trying to remove the trunk extension on my 67 belverdere in one piece to fix a dent in the corner,is has to be removed to fix it but was wondering what to use to get in there,a drill is to big to get at the spot welds.What worked for you.

I was doing some quarter panel replacing on my 67 and removed the gas tank so I don,t explode and decided I might as well replace gas and brake lines and exhaust,{what next} and bottom of floor is pretty nice with usual dirt and surface rust.I was wondering what paint seems to work the best on...

Looking for left and right wheelwell lips,mine are not rusted that bad just at the bottom.Here is a pic of something I would like.2 door or 4 door ,I can,t be picky.I,m not looking for the chrome trim,looking for a piece like is welded on in the pic for rust repair.

I need a 67 belverdere dr. side trunk extension but was wondering what ones fit.One company says chargers and other b-bodys are listed as the same and another lists only 67 belverdere,gtx,satellite as the piece to buy.So,which one will fit?

I have 2 rusted rear wheelwell lips on my 67 belverdere,not too bad but I,m going to try and make some.The patch panels are not even close plus I don,t need a whole panel,only have to make about a inch or more lip.I have a general idea of the shape of the lip but would like a nice close up...

I was wondering what anyone has used to fix the rusty wheel well lips,the patch panels don,t look right,there isn,t much bulge on the panel going to the bottom lip.

As you might have seen on my other threads I,m trying to re-do a bad quarter panel.My wheel well lip is rusted about a inch all along and was looking at patch panels to use the lip but they don,t look right,how did others fix this problem? - - - Updated - - - Opps,the top pic is the bad one...

I was wondering if making a template the shape of the side would be a good idea for doing body work and pounding out some dents of my quarter panel and welding in new pieces.There is some good dents along this section and I would like to try and get it so it turns out uniform along the side.

In the trunk area on a 67 belverdere,I think is called a splash apron,do they re-make these 2 items ? I don,t what they are called so I don,t how to find them

Well I have the bad panel removed on my 67 belverdere and I have these 3 pieces to fix it.The taillight section is what I'm worried about,not really sure how I should go about doing it.The other thing is the wheel lip on the new panels the same as stock,I remember reading that they had to be...

I have a 67 belverdere but the quarter full length patch panel has been welded over top of the old quarter panel.I can see good metal inside the wheelwell just the typical wheel lip rot.I was wondering if anyone has any ideas on removing the patch panel without damaging the original.The only way...

My 67 belverdere fender looks bad,I have a couple ideas on how I might try and patch it but there is many bends and rolls.Fat chance on finding a donor and with our Can. dollar at a all time low would cost a fortune to get a good fender shipped.The fender is good shape will a little rust coming...

I found a set of the good magnum ex. manifolds and was wondering if they will work.Is on a 67 belverdere with 318. I see they exit by the firewall close to the oil filter.I need a whole ex. system anyway so I will not be using the old pipes.I,m just having a quick eye ball on the situation...