Search results for query: *

I'm putting together a 440 that came with a cast crank. I have a steel crank that is fresh from the machine shop. My question is, can I use the steel crank in place of the factory cast crank? That would save me money from getting the cast crank turned.

Here's what my problem is. On the passenger side of my 67 Belvedere. After I jack the car up, I put one hand on top of the tire and one hand on the bottom, then try to shake it and there is no play. Then I put one hand on the left side of the tire and one hand on the right side and shake it, and...

Thank you sir.

Hyd lifters

I have Crane adjustable rockers. Do I need to turn them 1,1/2?

Anybody have a trick to remove and replace a valve spring still on the engine. It's a 440.

I understand. 440's are all I build. That's why I was asking how to build a 318'

I have a 1968 318. I've heard they are a great block to build. Looking for inexpensive suggestions to make good horsepower. Thanks....

I need a good cover for a 68 B Body. Any suggestions?

Yep, fuel pump. It's been a while. Thanks guys!

So i can't pull my cam out! I removed the oil pump gear and of course the lifters. The cam will only move about a half an inch and stop. What did I forget?

I'll use the calculator from Summit. Thanks everyone.

My engine has zero deck pistons and 516 heads. Could someone give me a close guess what my compression would be. Hope to run 91 octane!

Anyone help me with this?

I understand. Thank you sir.

Thanks. Any idea what they are worth?

What numbers should be on Max Wedge heads?

There is a local guy around here having good luck running that intake with fuel injected six pack.

Thanks for the advice guys.