Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Looking for SATIN finish Cragar super tricks with 4-1/2"-5" rear spacing. Must be in very good to excellent condition, no rash/corrosion/pitting/etc, 4-1/2" and 4-3/4"...OR...4-3/4" and 5" bolt patterns. PM me here if you have something I might be interested in, thanks.
Looking for a pair of Chrysler big block heads, casting number 4532287, un-molested, no mods or porting, prefered castings only, no vlaves or other parts. If you have something as-described, pM me here, thanks...
Looking for a decent set of 1.5 Isky rocker arms (with or without GOOD shafts) for big block (361-440) Chrysler engines, no damage or modifications (other than RAS bushings); rockers only or with GOOD adjusters. PM me here if you have something as-described, thanks...wb
Looking for a decent electric tach for my run-in stand. No junk please, nothing expensive (I can go to Summit/Jegs for that). If you have something decent and reasonably priced, please PM me here, thanks...wb
Looking for a reasonably-priced 10" 66-later 727 torque converter. Nothing damaged or needing work please, must be in 'bolt-in and run' condition; something in the 2500-3000 rpm flash range. PM me here if you have something as-described, thanks!
Still lookiing for a pair of 15x10 Cragar Super Trick wheels with both 4.5 and 4.75 bolt patterns with a 4-1/2" or 5" rear spacing in natural satin finish and in very good to excellent condition. If you have something as described, please pm me here. Thanks for viewing...wb
Looking for a very nice pair of 625 cfm Carter AFB carburetors. MUST be clean and very nice condition and without damage/modifcations. If you have something as described, please pm me here, thanks...wb
I did another of those 'wait and see' numbers...yeah, it backfired on me...again! Sooo, I'm trying to find a Quicktime 6073/8 or Lakewood bellhousing for B/RB/426H, new or used w/o any damage. If you have something as described, please PM me here, thanks...wb
I'm looking for an 8 bolt neutral balance aftermarket 130T flywheel, to buy or borrow for some dyno testing. I had a NOS Hays that I figured I'd never use...ha, how many times have y'all thought that and had it backfire?! Well, if you have something, PM the old dummy here, thanks...wb
4.30 is not a common set but a great set while sorting out a S/NSS car. Are they for a D60 (9-3/4" ring gear) or D70 (10-1/2" ring gear)? And are the standard or reverse rotation (truck front differential)? Thanks...wb
Looking for a set of 4.56 gears for 5 series Dana 60 w/29 spline. Must be in excellent & undamaged condition. If you have something that fits the description, please PM me here, and thanks for viewing...wb
Looking for a nice pair of Carter 9625/9626 or 9635/9636 Carter AFB carburetors. No corrosion or nasty carbs, must be decent with no damage or broken parts. If the plating on the linkage pieces is good, that's a big plus but rusty linkage is unacceptable, they must be void of all rust/corrosion...