avidflyr
Well-Known Member
I am building a .030 over 400 for a performance street 64 Polara.
My short block is done. Cam is Hydraulic flat tapper,232 @ .050 and 353/357 lift with1.5 Rocker. KB pistons 0.0" deck height. Iron heads open chambered, cleaned ports, bores valve pockets, SS upsized valves.
The high dollar roller rocker are a bit of overkill for my needs, so what to
choose and what is junk ...PRW, PXQ, PRO Comp etc.
My machinist and Hughes Engines is my resource for this build....Opinions Welcome .
My short block is done. Cam is Hydraulic flat tapper,232 @ .050 and 353/357 lift with1.5 Rocker. KB pistons 0.0" deck height. Iron heads open chambered, cleaned ports, bores valve pockets, SS upsized valves.
The high dollar roller rocker are a bit of overkill for my needs, so what to
choose and what is junk ...PRW, PXQ, PRO Comp etc.
My machinist and Hughes Engines is my resource for this build....Opinions Welcome .