• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

checking oil level in rv2 compressor

dan juhasz

FBBO Gold Member
FBBO Gold Member
Local time
7:17 PM
Joined
Aug 5, 2016
Messages
1,680
Reaction score
1,934
Location
Whiting NJ
service many says you can do it, but as soon as I start to loosen the oil fill plug I hear hissing. scared if I remove it, I will make a huge mess. Has anyone ever attempted this?
 
I think you have to evacuate the system to bleed down the pressure. Then you'll have to pull a vacuum and recharge it.
 
service many says you can do it, but as soon as I start to loosen the oil fill plug I hear hissing. scared if I remove it, I will make a huge mess. Has anyone ever attempted this?
Yes with a fully evacuated system.
Need an old oil dipstick to measure the oil. In the service manual.
 
Yes with a fully evacuated system.
Need an old oil dipstick to measure the oil. In the service manual.
yup you need to evacuate and check with dip stick
 
Auto Transport Service
Back
Top