• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

New profile posts

I need help with my 904 pulls 1st 2nd and drive but no reverse recently changed front imput again seal ans drive gear on pump and the front band but did not touch adjustment on rear bands idk need some advise
Not sure if you solved your shutdown issue or not... Typically the PCM will de-energize the fuel pump and ASD relays for shutdown. ASD (Automatic Shut Down) relay typically feeds fuel injectors and coil packs. I'd start there.

At least this is the way it works for my viper engine swap... Good luck - cool build!
I have a 64 Sport Fury. Are you still making hood scoops? If so, how much are they, or what are the price ranges and lead time on getting them?

Thank you
Hey there Everybody! I am new to the world of Mopar but am going to be baptized by fire in the weeks ahead..
did you rebuild your door hinges and if so where did you purchase the parts Thanks Stan
S
sevierstan
come on someone must of had the same problem with the upper door hinge , classic ind. does not have the hinges or springs can anyone have suggestions for a 1965 ply sat.
S
sevierstan
1965 ply sat. door hinge rebuild kit or hinges classic ind. does not have them and will never have them or springs
Hello,
I saw you and another guy going back and forth over a steering column question...that thread is several years old now but I was wondering if you could help with my question.
I have a 1966 Coronet and am rebuoilding the steering column. The little orange gear selector needle is what I'm struggling with. Can't seem to figure out how to mount it without it rubbing, binding, etc.
493 Mike
493 Mike
Man, it's been a long time working on one but, it seemed to me that the indicator went over the arced range sweep. Does it clip on?
H
High School Car
Yes, it is just a clip on little piece...I'm probably mis-orienting. That is most likely.
H
High School Car
...and it does go over the arc as you mentioned.
i was lookng at the mop755a rad. with the 16" fan set up with sroud , can you tell me who makes the fan to find the specs? and shoot me a price on both just the rad, and the rad+fan shroud combo , thanks ed
Hi Joe, Got the photos looks great if you can please send me your PayPal i'll get this paid right away thanks much, ED
Hi Joe, I am just looking for a stock 1970 AM radio, no BT or other extras do you have something like that? prices including shipping to IOWA 51014..? thanks ED 712-221-1352
hi, Just wondering if you are interested in selling the RIGHT side fresh air oval duct that you removed? i need it for my 1970 Roadrunner..thanks much
Craig,
I saw a post from last summer where you had/have motor mounts. I have a 73 Charger SE with a 400 4BBL and need the motor side (with insulator) motor mounts. Let me know. Thanks!
Hello Goldencommando, Can I ask where that is that you were gathering parts ? I have someone in your state that can pick up a hood that I need if he's not to far away. Can I have the address of the parts cars you were showing me ? Thank you, Cornpicker
Back
Top