• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FOR SALE Parting Out: 1971 Charger

Status
Not open for further replies.

Chase383

Well-Known Member
Local time
10:21 AM
Joined
Jul 31, 2012
Messages
221
Reaction score
40
Location
Pearland, Tx.
Feedback: 1 / 0 / 0
Contact seller
Hey Guys,

My parts car is seriously cramping my available space, so I need to get rid of the good parts. Only the items listed below are available, everything else is rotted beyond belief or I will be using it on my 71 Plymouth. Prices below are less shipping, I don't mind shipping small parts, but I can't ship the sheetmetal and running gear. I wish I could, but their is not a local Greyhound and Fastenal is in the a couple cities over. I work 60 hours a week so I asked interested parties to be patient with me.

NOTE: any interested parties that are close to me, if you are interested in large portion of the parts below, I will give a substantial package discount if you want to come over, talk Mopars and help me pull the parts of this car in the sweltering Gulf Coast weather.


Flat Hood (has some filler in the leading edge) $50

Vertical support, latch plate and hood latch $25

Both Front Fenders, with headlamp buckets and hardware (Rt fender has typical lower rust, Lt Fender has some filler on the top) $300 each

Front and Rear Valace panels (both are dented up) $75 for the pair

Both front and rear bumper assemblies including brackets $50 each

Front Grilles (Rt side cracked) $50 for the pair

Rt Door shell (seems to be pretty rust free) $100

Lt Door shell is kinda rusty, you can have it for free if you buy the Rt Door

Rocker Moldings (set, thin style) $65

Both Lt Side Wheel opening moldings $ 50 for both

Leading edge Hood/Fender Stainless (missing RT fender piece) $75

Stainless Molding for back of Hood/Fenders (complete) $90

Inner and Outer Drip Rail stainless (complete, both sides) $150

Wide Stainless Moldings for Doors and C-pillars (complete) $125

Full Vinyl Top Trim (missing Rt qtr panel piece) $75

Rear Window Stainless (embossed style for vinyl tops, top two pieces only) $50

Rear Qtr Fillers with stainless moldings $75 for both

Complete set of Side Markers $75

Complete 71 and up Slapstick shifter and linkage (Handle cracked) $75

71 318 2 barrel and 904 trans, this engine is largely unmolested and even has the original air cleaner on it. It does crank and tries to fire on with starting fluid... I have no idea of its internal condition. $100

8 1/4" rear axle, minus drums and shock plates $50


Think a price is too high? Never hurts to shoot me an offer, what ever I sell will help my other two Mopars in need. I don't want to throw good (or at least, usable) parts in the trash. Ever feel crushed when you find out somebody else pitched the part you needed... me too.

I'm all for horse trading, if you have '71 Roadrunner or '68 Coronet parts, let me know.
 

Attachments

  • Picture 001.jpg
    Picture 001.jpg
    70.9 KB · Views: 776
I've been busy pulling trim off tonight.

If you need pics let me know and I'll snap some.

Also, the thin rocker moldings I have listed above. I took a closer look at them. Somebody drilled extra holes in them. If you want them, you can have them for free if you pick them up, or pay actually shipping/packaging, which may be kinda high since I'll have to ship them in a long tube.

Both front and rear valance panels are also pretty hammered. If you are local and want them, they are yours.
 
How much for just the front edge fender stainless trim?
Is the drivers side grill good? You mentioned right side is cracked (is that passenger or drivers side?)
Wish you were closer, I could use the fenders too.
How dented up are the valances and bumpers?
What tail lights does the car have?
 
How much for just the front edge fender stainless trim?
Is the drivers side grill good? You mentioned right side is cracked (is that passenger or drivers side?)
Wish you were closer, I could use the fenders too.
How dented up are the valances and bumpers?
What tail lights does the car have?

I'll sell the front hood and Lt fender stainless for $75 OBO plus shipping. I don't want to split them up.

I was wrong on the grille, the LT side is cracked.

The valances are hammered... I won't sugar coat it.

If the sheetmetal doesn't sell soon... I'd be willing to ship if somebody can find a shipper. But my sorta-local Fastenal doesn't want to ship sheetmetal.

Tail lights are gone.
 
id be interested in the hood latch. I need the "exterior/ non remote" hood release mechanism and handle that protrudes through the grille. PM me if available.
 
Do you have the front left and right parking light lenses, rear defrost, sail panels? Also how are the left and right lower rear quarters? Thanks
 
Parking light lenses are toast, but I have the housings

No rear defrost

I can send pics of the interior sail panels if you PM you email address

Lower qtrs are beyond junk.
 
How are the rear frame rails? Are they identical to 71 gtx rails? If there nice I need them thanks
 
Sale pending on fenders, grilles, wheel opening moldings.

Front valance and rear bumper went in the trash... tired of tripping over them.


The rest of the car is starting to head that way too.
 

Attachments

  • Picture 069.jpg
    Picture 069.jpg
    66.3 KB · Views: 389
Not sure if you were referring to me, but I'm passing on the grills and front fender trim.
 
Let me know if the latch
Mechanism doesn't sell
 
Not sure if you were referring to me, but I'm passing on the grills and front fender trim.

No I wasn't, I think it I got your message? To be honest, I've answered numerous PMs and emails to get absolutely no response in return.
 
Sale pending on fenders, grilles, wheel opening moldings.

Front valance and rear bumper went in the trash... tired of tripping over them.


The rest of the car is starting to head that way too.

Hi, do you still have wheel opening molding?
Thanks
Ming
 
do you have a front license bracket?
 
Do you have the rear glass? If so how much, I'm in Mississippi
 
Status
Not open for further replies.
Auto Transport Service
Back
Top