Looking for a bolt on ready TRW power steering pump (and pulley if possible) for a 67 Chrysler.
WTB TRW power steering pump
- Thread starter dan juhasz
- Start date
- Status
I have a TRW pump that I have been told is for a Chrysler application.
The reason is that is has the large diameter return tube.
It does have a pulley but there is a ding in it that needs to be straightened.
The other thing is that I don't have the proper cap for it.
The price is $50.00 plus shipping from 46391.
Thanks!
The reason is that is has the large diameter return tube.
It does have a pulley but there is a ding in it that needs to be straightened.
The other thing is that I don't have the proper cap for it.
The price is $50.00 plus shipping from 46391.
Thanks!
John the cars owner says he may have found the correct unit. I’m waiting to see a picture from him. Your return nipple is much larger than what was on the car, that I know. If his is wrong I’ll reach out to you thanks for replying
Dan
rarefish
Well-Known Member
The large diameter return tube has to do with the year and not the model. The 1966 and earlier pumps had the larger 5/8'" return lines. In 1967 and later the pumps went to the smaller 1/2" return hose.
Someone correct me if I have the dates wrong...
Someone correct me if I have the dates wrong...
Last edited:
This was the original, thanks to ups it is mia
Dodge33
Well-Known Member
Yes.. that is correct, the only piece of information that I
question is I do think the return line on 67 year and up,
is 3/8" I do believe. I also could be wrong too.
the original was 3/8
FJ6 v code RR
Well-Known Member
I have one pm for price.
- Status
Similar threads
- Locked
