• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB 1967 coronet r/t inner door badges WI

Status
Not open for further replies.
Joshmopar11x

Joshmopar11x

Well-Known Member
Local time
11:01 PM
Joined
Aug 27, 2020
Messages
91
Reaction score
176
Location
Ellsworth
Feedback: 0 / 0 / 0
I'm In Wisconsin, I am looking for coronet r/t inner door call out badges dont need to be flawless by any means, car is a driver also looking for rear wheel opening moldings and rocker moldings. Will pay shipping if not near also looking for the r/t grill center piece
 
Classic Industries was reproducing the lower sill moldings. I bought a set about 5 years ago and they were nice.
 
Joshmopar11x said:
I'm In Wisconsin, I am looking for coronet r/t inner door call out badges dont need to be flawless by any means, car is a driver also looking for rear wheel opening moldings and rocker moldings. Will pay shipping if not near also looking for the r/t grill center piece
Click to expand...
You can expect to pay $240-$300 for a pair of the inside door emblems. Rear wheel well trim can be $300-$600 a set depending on quality. Grill surrounds $1500 plus, and center grill piece $300-$500. The trim on 67 R/T's including correct emblems is expensive. How do I know? I have close to 10K in the trim and bumpers for my 67 R/T. I may be crazy for doing that but it is what it is.
 
Sadly I know they aren't easy been softly looking for 10 to 15 years for them while I restore other cars I'll continue to wait until I find some more reasonable prices im obviously in no hurry
 
Does anyone have a junk one maybe I can have some 3d printed and just detail it
 
Here's mine

Snapchat-1515530256.jpg
 
Bill from Special T, outside of Chicago usually has some restored or NOS R/T pieces. The stuff is nice, but expensive. My insurance company had to spring for a grill surround from him after my front fender got totalled. That was $1100 five years ago. Wheel well and sill moldings are same for '66 Coronet 500. '66 and '67 Chargers have same front wheel well and sill moldings. Tail light bezels and trunk lid moldings are being reproduced. The big trunk lid piece is about $1000, but this is likely cheaper than having a used one repaired and chromed. The hood and trunk lid DODGE letters are being reproduced and are available from Classic Industries. The trunk lid R/T sign has been repro'd, but I am not sure the grill one has been. The rear quarter R/T signs are the same as the ones being sold for 1969 Charger and Coronet R/T stripe delete cars. The 4 chrome hood scoop bezels are also reproduced for less than $200 a set, cheaper than getting old ones rechromed. However, the R/T grill centre seems to be made of unobtanium. Here's my car.

P4300120.JPG P4300118.JPG
 
Dave6T4 said:
The big trunk lid piece is about $1000, but this is likely cheaper than having a used one repaired and chromed
Click to expand...
You don't want Speciality Bill to restore a R/T tailpannel. I handed him two very nice tailpannels and actually agreed to $2800 to restore the best one and get $350 for the other one. One year later, I owe him $3550 and my other tailpannel. Exceptional work but his price one year later was take it or leave it.
 
Jerry Hall said:
You don't want Speciality Bill to restore a R/T tailpannel. I handed him two very nice tailpannels and actually agreed to $2800 to restore the best one and get $350 for the other one. One year later, I owe him $3550 and my other tailpannel. Exceptional work but his price one year later was take it or leave it.
Click to expand...
:eek: About exactly what the whole damn car sold for new!! Unbelievable. I'm in the wrong trade/racket...
 
Jerry Hall said:
You don't want Speciality Bill to restore a R/T tailpannel. I handed him two very nice tailpannels and actually agreed to $2800 to restore the best one and get $350 for the other one. One year later, I owe him $3550 and my other tailpannel. Exceptional work but his price one year later was take it or leave it.
Click to expand...
Yeah, he is a take it or leave kind of guy. He wouldn't budge a nickle on my grill surround. I was lucky that he had a lone driver's side piece, otherwise, I would have had to buy a pair. I picked it up at Mopar Nationals because my car got hit the week before. He had on display the complete set of front shiny stuff for an R/T, as well as tail light bezels and trunk piece. $5000.00 for everything 5 years ago.
 
There is a company up here in New Brunswick, Canada that sells a lot of repro Mopar parts; P G Classics. I have one of their older catalogs that showed the '67 R/T trunk lid piece for $899US. I just looked up their web site, and this piece no longer shows up.
 
Man. I dont pay any of those crazy prices I have everything except what's listed above that im looking for I horse trade or get very lucky deals thankfully my front wheel opening moldings are mint and I paid 10 dollars a piece my trunk panel when I replaced it was 50 dollars and very nice no pitting I also hit a deer with mine so that's why it has a standard coronet grill at the moment
 
Status
Not open for further replies.

Similar threads

496coronet
  • Locked
WTB 1967 Coronet R/T driveshaft
Replies
9
Views
777
496coronet
496coronet
496coronet
  • Locked
WTB 1967 Coronet R/T 11" rear brake drums
Replies
1
Views
628
HALIFAXHOPS
HALIFAXHOPS
Tony George
  • Locked
FOR SALE 1967 Coronet R/T Emblems
Replies
0
Views
740
Tony George
Tony George
GearHead70
  • Locked
WTB 1967 Coronet R/T or 500 Seat Medallions
Replies
3
Views
805
RedBeard
RedBeard
piver
  • Locked
WTB Non-Rallye Dash Trim Bezels for 1968 Coronet R/T
Replies
1
Views
521
piver
piver
Auto Transport Service
Back
Top