WTB Engine Mounts B-Body BB to SB

[Coldsmoke]

Looking for a set of conversion mounts.
B-body (73' Charger)
Factory big block K frame to 318 swap.
Schumacher made them for years.
Pretty big offsets.
Wondering if anyone has or has seen a set of these.
I need them to finish my bucket list project.
Ty

 

[4mulas]

I have the E and B body 340 mounts for that application

 

[Coldsmoke]

I hear that the mounting area on the blocks are different on one side on the 340?
How much of an obstacle would this be?
Here are mine.

I have the E and B body 340 mounts for that application

 

[4mulas]

You’re right. The drivers side

 

[Dodge33]

Try www.engine-swaps.com The last time I was over to the website.. I think they were out of stock if IIRC. Give them a call or email them.

 

[Coldsmoke]

Try www.engine-swaps.com The last time I was over to the website.. I think they were out of stock if IIRC. Give them a call or email them.

I've been in touch with the new owners.
Production of that mount keeps getting pushed back.
No date as of now.
I have no choice but to pursue other avenues including making a set from scratch from photographs that I have.

 

[GTX JOHN]

I have the E and B body 340 mounts for that application

Are those conversion mts. for big block k member or std small blk K member.

 

[oldkimmer]

I have the E and B body 340 mounts for that application

Does an E body use spool mounts? Thanks. Kim

 

[4406bbl]

Does an E body use spool mounts? Thanks. Kim

No e-bodies did not switch in 73.

 

[Coldsmoke]

You’re right. The drivers side

I am interested. Could you please get a few detailed photographs?
With a tape measure would be very helpful.
If it would be easier to private message or email, that's perfectly fine.
Dave.

 

[GTX JOHN]

May I have 2nd chance to buy.
i do not mind redoing them a bit .

Apparently 4mulas does not accept
PMs?

 

[oldkimmer]

May I have 2nd chance to buy.
i do not mind redoing them a bit .

Apparently 4mulas does not accept
PMs?

Wow, I never seen that b4. Kim

 

[oldkimmer]

May I have 2nd chance to buy.
i do not mind redoing them a bit .

Apparently 4mulas does not accept
PMs?

John, I sent him a message on fabo to get ahold of u. Kim

 

[4mulas]

Does an E body use spool mounts? Thanks. Kim

Pretty sure biscuit for at least 70,71, 72. Not sure on 73 and up but I think they remained biscuit too?

 

[4mulas]

Are those conversion mts. for big block k member or std small blk K member.

I think it’s Same k member for big or small block. It’s just the mounts that are different?

 

[4mulas]

May I have 2nd chance to buy.
i do not mind redoing them a bit .

Apparently 4mulas does not accept
PMs?

I accept them. Not sure why that’s happening to you? I’ll check the settings. Try again later or I can pm you? Reply here if you like.

 

[4mulas]

I am interested. Could you please get a few detailed photographs?
With a tape measure would be very helpful.
If it would be easier to private message or email, that's perfectly fine.
Dave.

 

[4mulas]

May I have 2nd chance to buy.
i do not mind redoing them a bit .

Apparently 4mulas does not accept
PMs?

John, I sent him a message on fabo to get ahold of u. Kim

Not sure why settings were such that I didn’t accept pm’s. I think I have it right now. Try again, if it’s still not working reply back here by quoting me, then I’ll know you were trying to ahold of me..

 

[4406bbl]

I think it’s Same k member for big or small block. It’s just the mounts that are different?

72 1/2ish and up b-bodies use a different k-frame for big and small block.

 

[4406bbl]

View attachment 1262551 View attachment 1262554

Those are for 72 and down b-body and 70-74 e-body.