Pg z Classic z bar service kit quality? Anyone used one?

[4mulas]

Just wondering if anyone has ordered and used a PG Classic z bar Kit? Opinions? Any pictures of one laying around you haven’t used yet?

 

[moparedtn]

I got everything I needed from Dan Brewer (Brewer's Performance).
I don't reckon there's much better in the Mopar 4-speed/clutch world than them.

 

[R413]

He is in Canada so shipping and tariff is a consideration

 

[dadsbee]

Same price from Nigel and where I'd buy it from...
1966-76 B Body, 65-73 C Body, 70-74 E Body Complete Clutch Z-Bar-Cross Shaft Service Kit-Repro – National Mo-Parts

 

[4mulas]

Same price from Nigel and where I'd buy it from...
1966-76 B Body, 65-73 C Body, 70-74 E Body Complete Clutch Z-Bar-Cross Shaft Service Kit-Repro – National Mo-Parts

Thanks. I was looking at pg as it would end up being $66 with the current 25% off. I would normally use brewers if I had a big order and like their quality but for a one off I was thinking I’d take a flyer and try PG??
Just that the photo makes them look a little rough so to speak…??

(I need exhaust tips, a shifter boot under console, trunk weather strip, clutch pushrod boot, and was also looking at a set of rear sill plates for 68-70 as none of my local buddies have any used ones available for cheap which puts me over the 429 required to get 25 off, and shipping to me is only $35 for all of it)

Question: does Nigel stock all of this stuff or ?

 

[4mulas]

I got everything I needed from Dan Brewer (Brewer's Performance).
I don't reckon there's much better in the Mopar 4-speed/clutch world than them.

Love brewers and used them alot on other cars but as R413 mentioned exchange at 45% and shipping and duty to Canada makes it not a good idea. On larger brewers orders I had in the past I would drive to a Border town and pick them up myself (about 3 hours away)

 

[dadsbee]

Thanks. I was looking at pg as it would end up being $66 with the current 25% off. I would normally use brewers if I had a big order and like their quality but for a one off I was thinking I’d take a flyer and try PG??
Just that the photo makes them look a little rough so to speak…??

(I need exhaust tips, a shifter boot under console, trunk weather strip, clutch pushrod boot, and was also looking at a set of rear sill plates for 68-70 as none of my local buddies have any used ones available for cheap which puts me over the 429 required to get 25 off, and shipping to me is only $35 for all of it)

Question: does Nigel stock all of this stuff or ?

Forgot about their discount going on...

Pretty amazing what Nigel has stuffed into his garages at National Moparts. All you can do is ask.... I go through the parts listings, copy his part # and price and then send him an email vs using the order form if concerned about "in stock".