• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by 1carlover

  1. 1carlover

    Chrome on 67 Repro Sail Moldings

    I purchased a pair of reproduction sail moldings about 6 yrs ago and despite keeping them polished and out of the weather have become pitted. Im thinking of replacing them but wondering if the latest chroming process has improved the longevity of these parts?
  2. 1carlover

    67 Instrument light circuit

    I have a 12v circuit tester and a multimeter but not sure what instrument you are using.
  3. 1carlover

    67 Instrument light circuit

    The dome light circuit also gets power off the instrument fuse. When the fuse blows the dome light goes off but that's all. Each time I replace the fuse I make sure to turn off the dashlight dimmer first. Are you saying that I should jump the fuse with a test light then disconnect one circuit at...
  4. 1carlover

    67 Instrument light circuit

    It's not the headlight switch as I've tried several. On several occasions the dash lights will work perfectly then without notice will stop working the next day, blowing the fuse and the dome light goes out as well.
  5. 1carlover

    67 Instrument light circuit

    Nothing is tapped into the instrument circuit. Headlight switch goes on and off no issues. Problem occurs when dash light switch is turIned to the full left position. I dont think there is a radio lamp wire.
  6. 1carlover

    Wiring Help!!

    Hi I checked out your feed after posting my dash light issue and wanted to let you know that I have a new style 67 circuit board available if it would work in your car. It was installed for testing but is like new.
  7. 1carlover

    67 Instrument light circuit

    Help!! I'm still trying to isolate the cause of the dash light fuse blowing in my 67 r/t but can't find the source of the problem. More than likely its a grounding issue from an undetermined source and the dash lights are the only thing affected. The headlight switch and wiring or circuit board...
  8. 1carlover

    67 CORONET REAR SEAT SWAP

    Ok whatever but my seats are original equipment.
  9. 1carlover

    67 CORONET REAR SEAT SWAP

    I thought it might have had something do with the build date of the car or which plant the car was built. My rear seat had the matching wider pleat fabric before it was redone. I still have that original fabric.
  10. 1carlover

    WTB 67 Coronet steering column lower black plastic dash panel

    I probably will but thought I'd check here first.
  11. 1carlover

    WTB 67 Coronet steering column lower black plastic dash panel

    Looking for a nice one. Thanks.
  12. 1carlover

    67 CORONET REAR SEAT SWAP

    The rear bench seat in my 67 R/T had to be redone in the narrow pleat Legendary black vinyl material due to sun damage and the narrow pleat style upholstery was only available. My original front bucket seats have the wider style pleats. It would be great to find someone with the wide pleat rear...
  13. 1carlover

    67 coronet rt cluster

    I have a quick question. When this cluster is put back into the bezel, does the metal grounding strip go between the bezel and the cluster housing or on top?
  14. 1carlover

    WTB Red 440 Magnum Pie Tin

    That's the way it goes sometimes but thanks for playing!
Back
Top