Recent content by 3PlyHemi

If you're competent bending more complex shapes in to sheet metal you shouldn't have much trouble bending the SST sheet metal to fit the floor but in my case I'm planning to fab something up myself to make things a bit more serviceable.

Haven't had much to update photography-wise but I have made some stop-start progress over the last month's. Mounted the clutch and brake pedals, installed the driveshaft, mocking up throttle cable and throttle body, and today got my fuel tank, filters, and fuel pressure reg mounted. Now that...

A shot of the shifter hole for reference^

Currently in the process of installing my SST kit with a 5.7. So far I believe the only cutting I've had to do was the shifter hole in the floor, which in my case has to be QUITE large as my car was an auto, I think the hole is about 12x16 at this point. There's a plug in the firewall for the...

Sweet looking build and I love that it's clearly stirred the pot here! I'd be happy to pit my 5.7 satellite against it one day for a little late model competition! Glad to see there's plenty of young blood getting interested in projects like this.

Been a few weeks since I've had time to get some work done on the car and with the cold weather moving in I'm starting to feel a little down as the days get shorter but I got some big progress done! Transmission is in, though it's going to have to come back out again. I'm in need of one more...

I had a stroll through your thread it was a great read! Any advice for someone starting in to the install?

That car of yours is just beautiful. You've got sharp eyes! The ms3gold doesn't and provisions for electronic throttle so I've picked up a BBK mechanical throttle body and bouchillon mechanical throttle cable. At the moment the plan is to be gentle with the stock k frame and once I've got the...

Donor car is a 2005 300c and it's not giving away much beyond the engine and the seats. I'll be using an ms3gold to control the engine and planning to get PST disc brakes all around. The dream is to drive the car out of the garage in April once the snow melts up here :D

Been a long time coming to get this project off the ground but I've finally made some big waves so it's time to post some progress! SST kit showed up around a month ago and I've been collecting parts since I bought the car in 2017? 2018? Anyone else lost all sense of time? Anyway! After years of...

Where would be best on here to post build updates for anyone interested in the project? This past week has finally given me time to pull the motor from the donor car and start stripping it down for the install.

I'm a young guy I like factory EFI on my motors so I'm running stock fuel system and rounded up an MS3 from efisource to control it

Hey everyone, just joined the site in the last month or so because I'm finally getting some progress in on my beautiful project. 69 Satellite Sport from california that found her way in to the great white north and in to my garage and I've got more than enough time and money in to planning it...