Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Guy I know had a ton of problems with a 55 Chevy w/LS at the track. Turned out to be the sump deal in the Tanks, Inc. tank running out of fuel at top end of track. I have one in my efi 55 but it's just a 400hp street car.
Looking for a couple recommendations on spark plugs for a mild race build. Just to get break-in and dyno done without issue.
400/470 Stroker
Flat Top Pistons .004 in the hole
0.040" MLS Head Gasket
Performer RPM Heads - Ported
Approx .615" Lift Solid Lifter Cam
Trick Flow Single Plane Intake...
I have a similar but you pull the vacuum from the bleeder screw. Problem with that is as you loosen the bleeder screw it likes to draw air past threads so you have to remove them and thread tape first. Bit of a hassle. May have to see if I can invest in some covers for the master and bleed in...
The "ecu" for the Sniper is inside the front bowl of the unit. Your "high voltage" coil is inches away. Personally, I wouldn't like that. Also, coils are susceptible to fail from heat and vibration. Thus one of the reasons we try to get all that stuff off the motor.