• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Aron Gleason's latest activity

  • Aron Gleason
    Aron Gleason posted the thread Oil pan gasket in General Discussion.
    Do I really need to lift the motor in order to replace the oil pan gaskets on a 67 coronet with a 440 and a deep sump moroso pan?
  • Aron Gleason
    Aron Gleason replied to the thread 440 build.
    Thank you, that's some really good information
  • Aron Gleason
    Aron Gleason reacted to t.flatt's post in the thread 440 build with
    Like
    .
    If you're going with aftermarket rockers, you're most likely going to have to alter the rocker arm geometry. I had a set of Harland...
  • Aron Gleason
    Aron Gleason replied to the thread 440 build.
    My thoughts exactly on being able to run a badass street motor on pump gas.
  • Aron Gleason
    Aron Gleason reacted to 33 IMP's post in the thread 440 build with
    Like
    .
    EM did a comparison of the 270 to the 240, on a 440. The 270s were better everywhere, including low end torque. If you're willing to...
  • Aron Gleason
    Aron Gleason replied to the thread 440 build.
    Thank you for that information
  • Aron Gleason
    Aron Gleason reacted to dvw's post in the thread 440 build with
    Like
    .
    I see no problem with a solid roller if you use bushed lifters. Stock stroke and block with 270's is a higher rpm package. 11.5-1 might...
  • Aron Gleason
    Aron Gleason replied to the thread SOLD Dodge Scat Pack jacket size XL.
    Im interested
  • Aron Gleason
    Aron Gleason replied to the thread 440 build.
    Thank you for the input.
  • Aron Gleason
    Aron Gleason reacted to 68-500's post in the thread 440 build with
    Like
    .
    Great name brand. I have no personal experience. Rick is right TF has the combo your looking for. I just don’t like hydraulic lifters...
  • Aron Gleason
    Aron Gleason replied to the thread vertigate.
    Going once, going twice. Sold to eldubb440 lol
  • Aron Gleason
    Aron Gleason replied to the thread 440 build.
    Would harland sharp rocker arms be a good choice?
  • Aron Gleason
    Aron Gleason replied to the thread 440 build.
    Thank you everyone for the replies, they're all very welcomed and I'll take into serious consideration. The 240's seem to be a...
  • Aron Gleason
    Aron Gleason reacted to 68-500's post in the thread 440 build with
    Like
    .
    Solid lifter cam for sure, roller or flat tappet is a personal choice Lean towards a wider LSA with the 11.5:1 compression ratio...
  • Aron Gleason
    Aron Gleason reacted to Cheapsunglasses's post in the thread vertigate with
    Like
    .
    On marketplace , so you either got a steal at ……$69 …… or you had to fork out $420. That’s my guess :lol:
Show older items
Back
Top