• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by Dana67Dart

  1. Dana67Dart

    Any value in a 66 383 cast iron 2bbl intake?

    A guy on FABO is taking it. I couldn't be happier
  2. Dana67Dart

    Any value in a 66 383 cast iron 2bbl intake?

    Thanks all and Happy 4th of July. It was as expected. I have it listed in a for sale free ad on FABO [FOR FREE] - 66 383 2bbl Cast Iron Intake free just pay shipping or local pickup Wednesday the 9th is its final day, Just no room to store boat anchors I did strip it of all the parts, studs...
  3. Dana67Dart

    Any value in a 66 383 cast iron 2bbl intake?

    Right now it's on the scrap bin. Any reason to remove it? I'm never going to use it and I don't have room to store it.
  4. Dana67Dart

    FBBO Benefit Auction for @CudaChick1968!

    PayPal sent, hope it helps. My wife lost her mother this May and feels your pain.
  5. Dana67Dart

    SOLD Free, just pay shipping, 8 3/4 axles

    https://www.forabodiesonly.com/mopar/threads/e-body-8-3-4-axles-just-pay-shipping.455798/#post-1972852721
  6. Dana67Dart

    SOLD E-Body 8 3/4 Housing, LBP Axles, 11 x 2.5 Backing plates, hwd, Drums

    More photos
  7. Dana67Dart

    SOLD E-Body 8 3/4 Housing, LBP Axles, 11 x 2.5 Backing plates, hwd, Drums

    More Photos
  8. Dana67Dart

    SOLD E-Body 8 3/4 Housing, LBP Axles, 11 x 2.5 Backing plates, hwd, Drums

    E-Body Housing 56.5 flange to flange & 46 perch CL to perch CL Axles LBP 30" long (1 with good-Left hand studs, 1 with no studs) 11 x 2.5 backing plates and hardware (both adjusters work freely, one wire wheeled) 11 x 2.5 drums (Turned, one measures 11.090" the other is 11.126" parts store...
  9. Dana67Dart

    8 3/4 Rear Identification

    Ya... I found the 32nds and 64ths to be excessive decimal places. I rounded 29 31/32 to 30 and 56 31/64 to 56 1/2 when I was using the charts to determine what the housing and axle is. I'm going with E-body 70-74 with a swapped in center section.
  10. Dana67Dart

    8 3/4 Rear Identification

    FABO agree that vent changed between 69 /70. 69 and older on hump, 70 and newer on tube.
  11. Dana67Dart

    8 3/4 Rear Identification

    http://www.moparts.org/Tech/Archive/axle/16.html Seems to be complete but I don't know how accurate it is. Many on FABO think it is correct.
  12. Dana67Dart

    8 3/4 Rear Identification

    Info I have seen has left hand threads to 70 but not in 71
  13. Dana67Dart

    8 3/4 Rear Identification

    I have been told by numerous sources that that particular chart is not very accurate. I agree that the rear screams E-body except for the Breather location being a 69 and older location. Could be an early 70 housing that was built in 69 and maybe the change over happened mid run.
  14. Dana67Dart

    8 3/4 Rear Identification

    Took some photos. 56 1/2 flange to flange (Assuming Moparts' dimensions are correct it can't be any thing but 70-74 E-Body) 46 CL perch to CL perch (yes the photo is left side to left side but that's the same as Cl to CL, 65-73 B-Body or 70-74 E-Body) Breather on the hump pre 70 Any thoughts...
  15. Dana67Dart

    8 3/4 Rear Identification

    I'm fairly confident that the center was swapped as the date on the gears and sure-grip are 1966 and the housing flange width is 70 -74 E-body but I'm still baffled by the breather location. 66-69 Station wagon maybe?
See more
Back
Top